Cx 2510 Rear Remotes

onezero1010101 · Apr 13, 2025

I have a cx2510hst, I have the factory 3rd function on the loader control. I'm looking at getting the Norwood hydraulic capstan for the rear.

My question, the factory CKA 101 rear remote kit, I'm assuming that can install fine with the 3rd function, since I would guess it would connect to the PB. Does anyone have the factory rears, and can tell me what type of activation method it uses? Is it button, switch, lever and where does it go?

With the capstan, I will need the rear to be able to be turned on with a switch or lever that can lock on, since I will be operating it from the ground.

I also have seen some people on YouTube, that look to have the capstan directly connected to the hydraulics, so it runs whenever the tractor is on. Not sure how they done that, is that using the backhoe hydraulic connection? I'm guessing thats not ideal.

Also, do we have any dealers in here? I found the kit on eBay for $750, but haven't reached out to any dealers yet.

Thanks!

Jtsnow · Apr 13, 2025

Hi. It’s just a handle that goes in the slot beside the 3 point lever. I believe all the way back is a detent which is used to keep constant flow going (to backhoe or any other device that has its own valve or motor)

As to cost I googled and saw some for 340 US. I am in Canada and being charged 550 I believe it is installed on the one I ordered.