Cylinder rebuild help needed?

   / Cylinder rebuild help needed?
  • Thread Starter
#11  
I took the cylinder parts to Coastal Equipment & Hydraulics in Cantonment, Florida today. Wally was the guy that helped me and did a first class job of getting everything I needed and took the time to show me how the seals fit. Total bill $47.48 including new steel fittings. Everything went back together without a hitch. I hooked up the 6' bush hog and left it hanging for over two hours with no leak down. Thanks again for the help. Congratulations to you KennyD on being the member of the month. It is easy to see why you were chosen. Mitch
 
   / Cylinder rebuild help needed? #12  
Congratulations to you KennyD on being the member of the month. It is easy to see why you were chosen. Mitch

Holy crap batman! News to me:eek::eek::eek::eek: Where did you read this?

Glad you got the parts OK...Wally sounds like a good guy:D
 
   / Cylinder rebuild help needed?
  • Thread Starter
#13  
You really didn't know? Ah shucks, grin, yeah right. Go to Tractorbynet Home. It is right there front page.
 
   / Cylinder rebuild help needed? #14  
You really didn't know? Ah shucks, grin, yeah right. Go to Tractorbynet Home. It is right there front page.

No, I didn't! My shortcut to TBN brings me directly to the forums...WOW:D
 
   / Cylinder rebuild help needed? #15  
Kennyd, if you did congrats. You do deserve it. I can not find it!!!!!! Did search and found nothing. May be by the 30th we will all know.
 
   / Cylinder rebuild help needed? #18  
Thanks guys, I do see it now:thumbsup:
 
   / Cylinder rebuild help needed?
  • Thread Starter
#19  
Kenny, enjoy the balloons, confetti, champagne, caviar and notoriety. You deserve it and I am pleased to be the one that broke the news to you.
I used the top link all day and it worked fine. I will never be reluctant to tear into a cylinder again. Mitch
 
   / Cylinder rebuild help needed? #20  
Kenny, enjoy the balloons, confetti, champagne, caviar and notoriety. You deserve it and I am pleased to be the one that broke the news to you.
I used the top link all day and it worked fine. I will never be reluctant to tear into a cylinder again. Mitch

Thanks Mitch:thumbsup:
 

Tractor & Equipment Auctions

2025 JMR 78in Dual Cylinder Grapple Skid Steer Attachment (A53421)
2025 JMR 78in Dual...
UNUSED AGT SSPOC HYD LOG GRABBER (A52706)
UNUSED AGT SSPOC...
2016 Ford Taurus AWD Sedan (A53424)
2016 Ford Taurus...
2018 John Deere 1653 (A55314)
2018 John Deere...
(INOP) CATERPILLAR 914G WHEEL LOADER (A52705)
(INOP) CATERPILLAR...
2024 JOHN DEERE 6110M LOT NUMBER 56 (A53084)
2024 JOHN DEERE...
 
Top