Cylinder rebuild help needed?

   / Cylinder rebuild help needed?
  • Thread Starter
#11  
I took the cylinder parts to Coastal Equipment & Hydraulics in Cantonment, Florida today. Wally was the guy that helped me and did a first class job of getting everything I needed and took the time to show me how the seals fit. Total bill $47.48 including new steel fittings. Everything went back together without a hitch. I hooked up the 6' bush hog and left it hanging for over two hours with no leak down. Thanks again for the help. Congratulations to you KennyD on being the member of the month. It is easy to see why you were chosen. Mitch
 
   / Cylinder rebuild help needed? #12  
Congratulations to you KennyD on being the member of the month. It is easy to see why you were chosen. Mitch

Holy crap batman! News to me:eek::eek::eek::eek: Where did you read this?

Glad you got the parts OK...Wally sounds like a good guy:D
 
   / Cylinder rebuild help needed?
  • Thread Starter
#13  
You really didn't know? Ah shucks, grin, yeah right. Go to Tractorbynet Home. It is right there front page.
 
   / Cylinder rebuild help needed? #14  
You really didn't know? Ah shucks, grin, yeah right. Go to Tractorbynet Home. It is right there front page.

No, I didn't! My shortcut to TBN brings me directly to the forums...WOW:D
 
   / Cylinder rebuild help needed? #15  
Kennyd, if you did congrats. You do deserve it. I can not find it!!!!!! Did search and found nothing. May be by the 30th we will all know.
 
   / Cylinder rebuild help needed? #18  
Thanks guys, I do see it now:thumbsup:
 
   / Cylinder rebuild help needed?
  • Thread Starter
#19  
Kenny, enjoy the balloons, confetti, champagne, caviar and notoriety. You deserve it and I am pleased to be the one that broke the news to you.
I used the top link all day and it worked fine. I will never be reluctant to tear into a cylinder again. Mitch
 
   / Cylinder rebuild help needed? #20  
Kenny, enjoy the balloons, confetti, champagne, caviar and notoriety. You deserve it and I am pleased to be the one that broke the news to you.
I used the top link all day and it worked fine. I will never be reluctant to tear into a cylinder again. Mitch

Thanks Mitch:thumbsup:
 

Tractor & Equipment Auctions

Komatsu FD40T-7 Forklift (A54865)
Komatsu FD40T-7...
2021 Kubota RTV X900 4x4 Utility Cart (A55787)
2021 Kubota RTV...
2018 JCB Truss Jib Telescopic Hydraulic Boom (A53421)
2018 JCB Truss Jib...
2004 Ford F-550 Miller 301 Wrecker Truck (A55852)
2004 Ford F-550...
2007 Ford F-450 4x4 Cab and Chassis Truck (A55852)
2007 Ford F-450...
2013 TAKEUCHI TL10 SKID STEER (A52707)
2013 TAKEUCHI TL10...
 
Top