Danuser 2040, any good?

[ericstac]

I found a Danuser 2040 for sale and was wondering if they were good post hole diggers?

 

[radman1]

Simply put, Yes. Danuser makes a very good PHD.

 

[City Dude]

Simply put, Yes. Danuser makes a very good PHD.

I have an L4610 Kubota. Just started looking for PHD's and see that Danuser has several models. Any suggestions as to which I should attempt to locate? Other options for reliable PHD?

Thanks,
Just starting into our "retirement goal" and need to start my fencing project etc...

 

[jenkinsph]

Danuser has been making them as long as I can remember and parts availablility is very good.

For fencing I use a 6" auger for line posts, a 9" for terminal posts and a 14" for gate posts and real problem areas.

If I were to choose just two augers I would go for a 6" and a 12" and use a manual phd to enlarge the holes for gates.


Steve

 

[City Dude]

Danuser has been making them as long as I can remember and parts availablility is very good.

For fencing I use a 6" auger for line posts, a 9" for terminal posts and a 14" for gate posts and real problem areas.

If I were to choose just two augers I would go for a 6" and a 12" and use a manual phd to enlarge the holes for gates.


Steve

Thanks for the advice.