Jan 19, 2022 / Deere 2520 snowplow Thread Starter #11 OP B brewers11 Member Joined Nov 1, 2012 Messages 34 Location coudersport,pa Tractor John Deere 2520 Cut the springs shorter and reposition them. Welded the skid shoes back on also
Jan 19, 2022 / Deere 2520 snowplow Thread Starter #12 OP B brewers11 Member Joined Nov 1, 2012 Messages 34 Location coudersport,pa Tractor John Deere 2520 I bolted a 1/2" rubber mold board on it. Found this helps not tear up the yard, and doesn't catch or grab like the steel edge.
I bolted a 1/2" rubber mold board on it. Found this helps not tear up the yard, and doesn't catch or grab like the steel edge.
Jan 19, 2022 / Deere 2520 snowplow Thread Starter #13 OP B brewers11 Member Joined Nov 1, 2012 Messages 34 Location coudersport,pa Tractor John Deere 2520 Last thing, I run chains on the front wheels. They would slap or rub on the steering knuckle. So I had 1" spacers made. Milled a shoulder on it to fit the rim and bolt holes drilled.
Last thing, I run chains on the front wheels. They would slap or rub on the steering knuckle. So I had 1" spacers made. Milled a shoulder on it to fit the rim and bolt holes drilled.
Jan 19, 2022 / Deere 2520 snowplow Thread Starter #14 OP B brewers11 Member Joined Nov 1, 2012 Messages 34 Location coudersport,pa Tractor John Deere 2520 9 inches of snow fell, lets test it out https://youtube.com/shorts/KzjsygG8e6U?feature=share
Jan 19, 2022 / Deere 2520 snowplow Thread Starter #15 OP B brewers11 Member Joined Nov 1, 2012 Messages 34 Location coudersport,pa Tractor John Deere 2520 Drive is 1000 ft, dirt with a slight incline.
Jan 19, 2022 / Deere 2520 snowplow #16 M metalbender Veteran Member Joined Aug 31, 2018 Messages 1,240 Location Sask, Canada Tractor Massey 1742 Perfect, like to see a project come together.