Hi, I know a similar question has been asked.... However, my tractor is older so I'm inquiring. I have a John Deere 3020 w an original JD Loader attached. My bucket is shot.... I happen to have a skidsteer bucket in excellent shape so I'm looking to purchase an adapter. I don't know what the "style" of attachment the John Deere Loader has I figure someone knows this off the top of their head. I checked with the JD dealer and they were not very helpful. Please point me in the right direction. Thank you! If you need a picture, let me know I'll get one.
Deere 3020 w original loader need a skidsteer adapter
Carl_NH
Elite Member
- Joined
- Apr 5, 2002
- Messages
- 3,678
- Location
- Coastal NH
- Tractor
- 01 Kubota B21TLB, 2010 Ferris 52" ZTR, Cub Cadet 1811, Gravely Super8
If you have the JD 3020 with 148 loader, its a pin-on bucket - you need the QA conversion plate with ears to pin your bucket cylinders onto. There are a number of after-market adapters.
But if the back of your bucket - pins and plate are OK cut the bucket off weld on a $150-200 QA plate would be the least expensive route, https://www.amazon.com/Titan-Attachments-Universal-Loader-Bucket/dp/B00PR2W482?th=1
But if the back of your bucket - pins and plate are OK cut the bucket off weld on a $150-200 QA plate would be the least expensive route, https://www.amazon.com/Titan-Attachments-Universal-Loader-Bucket/dp/B00PR2W482?th=1
Peter 315
Super Member
I think you need this one . You can call them and see.PIN ON JD 148-158 TO SKIDSTEER
Last edited:
bigtiller
Super Member
- Joined
- Feb 1, 2006
- Messages
- 6,366
- Location
- central Iowa
- Tractor
- John Deere 2720 John Deere 3039R John Deere Z545R
Most of the 3020's I have seen around here have either a 48 or a 148 Deere loader. The difference is - the 48 has one hydraulic cylinder and the 148 has 2 hydraulic cylinders.
gstrom99
Veteran Member
- Joined
- Nov 4, 2015
- Messages
- 1,700
- Location
- Greene, Iowa
- Tractor
- Deere 855, Deere 530R zero turn, Allis Chalmers D17 III, Polaris Ranger, Deere 3032E (SIL's), Yamaha Timberwolf 250, Husky saws, H & H 10k and Carry-On trailers
I don't know which one myself, but you may want to ask these guys. I've bought a few adapters here for my 410 loader, at very good (IMHO) prices.
Tx Jim
New Member
Finding the right adapter for older equipment can be a pain. It’s essential to identify the loader’s attachment style first. I know that titan attachments often has adapters for various models, and they've been helpful for many users. You can check their site if you are still in search.
Last edited:
