Deere 5065e pricing

[Eric_4410]

I have decided on a 5e series tractor with a loader.

I have a price from my local dealer for a
5065e 12 speed power reverser
MFWD
520M loader
price is 43K

looks inline with what I see on machine finder.
Does anyone know what kind of discount I should be able to get from thier first price?

 

[Seven Gables]

Welcome to TBN , is that a new tractor with warranty? Cash price? Or with low interest financing price? It is for sure the 12 speed power reverser transmission? That is a real nice tractor especially with the power reverser transmission. That 520m loader is a really good stout loader also. There’s a lot of the 5065e’s for sale on various internet sites like tractor house , smart to scroll thru them and compare comparable specd prices. If you can find the same exact tractor cheaper at another dealer that would give you some leverage with your dealer. If it’s new and as you describe I doubt he’ll move much but you never know. Good luck

 

[Eric_4410]

Sorry left some of those details out.

It is a 2 year lease return that the customer hardly used.
It is a 2022 with less than 20 hours on it.

So a better description

2022 5055e MFWD
12 speed
520M loader
20 hrs
remaining warranty. basic warranty expire soon.
pricing is ~$1000 more than some comparable tractors but they would require shipping / hauling
that would equalize the cost to me.

 

[Seven Gables]

Is it a 5055e or 5065e ? Does it have a cab ? If it’s a 5055e no cab you can do much better. Quick look online Mast tractor sales has 5055e no cab 12 speed 90hrs for 38,900 . If it’s a 5055e with cab I’d say decent price. Can’t help till you completely give accurate description

 

[Eric_4410]

Sorry I fat fingered the model number in my last post
It is a 5065 no cab with a 520m loader

 

[Seven Gables]

Gotcha , well I’d say that’s not to bad a price. You might be able to finagle it down a little maybe a K or 2 based on I’m seeing some 5075e’s specd the same for right around that 43 number.. There’s over 400 5075’s for sale so that’s probably got much to do with it. Id use that as a bargaining chip. Maybe offer him 40-41 sense you’re starting to lean towards a 5075 for same price. Find some to back up your claims. Knowing the market and what’s out there at what prices is your best card for getting the best price. Unless you need the extra 10 hp for pto power I’d just as soon have the 65 . It’ll lift the same both loaderand 3pt, pull the same maybe 1 gear lower only if you plan on pulling some high draft loads . That being said I wouldn’t want to pay the same for a 65 as I could buy the same low hour and specd 75.. Sounds like you’re doing your homework though that’s the best you can do.
One thing I would highly suggest is get some sort of 3pt ballast, that 520 loader has a lot of lift capacity. A set of 3pt forks with even a homemade weight box u could slip the forks into quick is a fairly inexpensive option. Show us some pictures of what you’re looking at if possible. Good luck

 

[redman135]

At 20 hrs that tractor is not run in. I suggest you ask the dealer how to run the tractor in properly.
Good Luck

 

[Eric_4410]

they don’t have the tractor in yet but I will post a picture once I get one

I am looking at 5075s for comparison and have some that are very close in price. I will use those for discussions with my dealer

I will add some wheel weights and maybe rim guard. I am looking at ways for a three point ballast. In short term I have a rotary mower that will help a lot but won’t help getting into tight areas

 

[Rmart30]

One of my friends bought same tractor 2 years ago with almost 300 hours on it. it was less than 4 yrs old, 4x4, had loader with 3rd function and rear remotes. $26,500.

 

[Seven Gables]

they don’t have the tractor in yet but I will post a picture once I get one

I am looking at 5075s for comparison and have some that are very close in price. I will use those for discussions with my dealer

I will add some wheel weights and maybe rim guard. I am looking at ways for a three point ballast. In short term I have a rotary mower that will help a lot but won’t help getting into tight areas

Just curious if you’ve got any pics of what you decided on ? Have you come up with a plan for 3pt counterweight?

 

[LightningCamaroGuy]

I bought my 18 5075E, 12x12, MFWD, convertible brand new for $36,200, but it's no longer 2018, and prices have gone up, but I think now is not a bad time to buy in this economy.

It's a good machine with some good weight for a tractor in its class, but yeah the 520M is a lot of loader for this tractor. Not only is it beefy, and rated to lift a lot, but sticks out farther in front of the tractor than most its competitors. That's good for lifting high, but it does place a lot of weight farther out in front of the tractor, and it makes maneuvering something you need to pay attention to. On the plus side a 3 cylinder, 5E with its short 80" wheelbase is like a freaking go cart tractor with the loader removed which is easy to do. Its a very nimble machine without the loader, but with the loader hanging out as far as it does it can be cumbersome in tight areas, but you learn to manage it. I take mine in the woods all the time.

 

[Rustyiron]

If the dealer can't move on the price, there's always asking for another pair of remotes on the rear or a 3rd function on the loader. Even if you pay for the parts and he throws in the labor it's better than nothing.
I imagine that the 3rd function is the more expensive of the 2. It's probably the better choice, ask anyone to runs a snow plow or brush grapple.
Welcome to TBN.

 

[Eric_4410]

Tractor was delivered yesterday.
So far it is working well

 

[Seven Gables]

Congratulations, looks like it’s brand new which for all practical purposes it is . I can’t imagine how someone can justify paying a two year lease on a tractor and only putting 20 hrs of use on it. Great find for you though . That global quick attach is super quick and strong, you’ll love that.
What will be your main uses for it?

 

[Eric_4410]

We have a property that is 80 acres 1/2 timber and 1/2 pasture and a pond. I have a 4410 that I have been using to mow and clear brush (honey suckle and Russian olive) and other general maintenance and it is just not big enough. The new tractor will help get though stuff much faster