Comparison Deere 5065E vs M7060 value & pricing

   / Deere 5065E vs M7060 value & pricing #71  
here is why I never mentioned them and I sure wouldn't be mentioning Kubota but that is why the OP is considering - WHY?

Because I just did 9 months of extensive shopping and here is how the $$ played out for me when shopping for my tractor. Prices highest to lowest.

1) Kubota
2) LS
3) Mahindra was close to LS
4) New Holland
5) Case IH - very close with might as well call it a draw
6) Branson
7) Deere
8) Kioti
9) I didn't look at yanmar they didn't have what I was looking for

So..........as you can see as close as like for like Deere was by far the best price in the CUT I ended up getting however being fair NO ONE makes a higher HP tractor with a MMM in 72" so I was doing my best to compare as close as I could to the 2038R.

That is why I didn't mention Mahindra, they are proud of their stuff as well as LS maybe as you get in the larger stuff it starts to even out or swing the other way - I haven't shopped in those areas as I have two in the mid HP range that I REALLY ENJOY!!!

No they are not modern cabbed tractors but they are sweet to me!!!
 
   / Deere 5065E vs M7060 value & pricing #72  
Tractor and implement sales aren't exactly rocking right now with commodities where they are. I can't imagine these dealers are passing up any potential buyers.

industry is up about 15% actually.

also will add, lots of guys talking a lot about emissions. I sell tractors with DPF and DOC based engines. Emissions is a terrible thing to use as a comparison feature in tractors. One is not any more trouble free than the other.
 
   / Deere 5065E vs M7060 value & pricing #73  
We started the organization in Kansas and that operation is using a 5065E. We expanded into Eastern TN due to acquiring an additional farm and the ability to directly contribute to the community.

Thatç—´ our current project and why we need another tractor. I started comparing the 2 units from Kubota and Deere when Deere changed the new 2018ç—´.

I知 not unhappy with the performance of the 5065 just always like to look at other options and get the best value for the dollar.

Buying a 5065 is completely off the radar because the pricing is DRAMATICALLY more expensive than the first one. We were quoted 15k more than we paid in 2016. I知 not sure if that痴 due to the model changes or what but I知 not paying 45k for a 65hp open station utility tractor.

What I致e noticed purchasing machinery is that the manufacturer really sets the tone for pricing. One year they could have national discounts of over 10k and the next it might be hardly anything.

I wish the big 3 would stick with figures that are set in stone but appropriate for what the models worth. Now you have a situation where used 2016ç—´ with 200 hours are going for 26k and new ones are almost 50k.

If that痴 truly the pricing than guys are losing half the value of the tractor in 2 years and 200 hours. Now obviously that isn稚 the case and the vast majority of buyers are national accounts, big producers, and leases who get significant discounts (27% or more). It just sucks that the little guy usually ends up paying full freight.

I have no idea where you are getting that $45k number from. Here is a link for Hutson, Inc - they have a location in Clarksville, TN and they're selling the 5065E w/loader for $28,600.
Utility Tractor Special | Hutson Inc <-- 5065E for $28,600 or $30,900 for Power Reverser model.

Well under your $33k budget and the same tractor at both locations so you can stock 1 set of parts/filters/etc for both tractors since they would match.
 
Last edited:
   / Deere 5065E vs M7060 value & pricing #74  
I’m not buying that price on the 5065e. My father in law just purchased a 4052 and it was $32k with loader. It was a no frills tractor with no options, not even a set of remote hydraulics.
 
   / Deere 5065E vs M7060 value & pricing #75  
I’m not buying that price on the 5065e. My father in law just purchased a 4052 and it was $32k with loader. It was a no frills tractor with no options, not even a set of remote hydraulics.

4052 comes as 4052M or 4052R model only. Any "M" or "R" model will cost more than a "E" model from John Deere. There is a link in the post above to Hutson's website which states the price on their website. If you can't believe that then I can look up the info for the Tennessee Attorney General so you can file a complaint with them that you think Hutson's is falsely advertising. Or you can call yourself tomorrow when they are open.
 
   / Deere 5065E vs M7060 value & pricing #76  
the low 30s number is spot on, I just did the build your own and with a loader - deducting 20ish percent brings it into the low 30s area which would make sense on the sales/out the door price - I saw 5055 and 5065 at a local dealer and they must have gotten a bunch in off lease they were manual trans though and they all had from 150 to 400 hours on them, looked as new and only one had a loader they were selling them for 14000 to 16400 depending on hours - they were 2wd however they had one and I don't recall if it was a 45 or 55 that was 4wd and it had a loader and it has 21 sumpthing on it - they were all gone within a couple weeks
 
   / Deere 5065E vs M7060 value & pricing
  • Thread Starter
#77  
I have no idea where you are getting that $45k number from. Here is a link for Hutson, Inc - they have a location in Clarksville, TN and they're selling the 5065E w/loader for $28,600.
Utility Tractor Special | Hutson Inc <-- 5065E for $28,600 or $30,900 for Power Reverser model.

Well under your $33k budget and the same tractor at both locations so you can stock 1 set of parts/filters/etc for both tractors since they would match.

It’s what the local dealer quoted me.
 
   / Deere 5065E vs M7060 value & pricing
  • Thread Starter
#78  
the low 30s number is spot on, I just did the build your own and with a loader - deducting 20ish percent brings it into the low 30s area which would make sense on the sales/out the door price - I saw 5055 and 5065 at a local dealer and they must have gotten a bunch in off lease they were manual trans though and they all had from 150 to 400 hours on them, looked as new and only one had a loader they were selling them for 14000 to 16400 depending on hours - they were 2wd however they had one and I don't recall if it was a 45 or 55 that was 4wd and it had a loader and it has 21 sumpthing on it - they were all gone within a couple weeks

I’m calling Hutsons tomorrow and taking that deal if Kubota doesn’t beat it. I was quoted 46k out the door. Honest to God. I asked if that’s the best they could do and got a firm yes.

Thanks for the find gentlemen, you made my week!
 
   / Deere 5065E vs M7060 value & pricing #79  
I’m calling Hutsons tomorrow and taking that deal if Kubota doesn’t beat it. I was quoted 46k out the door. Honest to God. I asked if that’s the best they could do and got a firm yes.

Thanks for the find gentlemen, you made my week!

That's what we are here for. Get all the particulars/specs in writing to you (e-mail quote) to cover yourself and the mission. I hope you do well tomorrow either way!
 
   / Deere 5065E vs M7060 value & pricing #80  
Not sure what model you have in the Kansas operation - Hutson's is listing both a 9/3 transmission model with a 520M loader and the next price up is the 12/12 Power Reverser transmission with the larger 540M loader - might be more convenient to match up the model in Kansas - easier for you to train new volunteers. Just a thought. :)
 

Tractor & Equipment Auctions

2018 Toyota RAV4 Hybrid XLE AWD SUV (A50324)
2018 Toyota RAV4...
2020 Case IH 8250 4WD Combine (A50657)
2020 Case IH 8250...
2019 HINO 155 16FT BOX TRUCK (A50505)
2019 HINO 155 16FT...
(INOP) CATERPILLAR TL943 TELESCOPIC FORKLIFT (A50459)
(INOP) CATERPILLAR...
2014 John Deere 635F Grain Platform (A50657)
2014 John Deere...
2022 Case TR340B Skidloader (RIDE AND DRIVE) (A50774)
2022 Case TR340B...
 
Top