Tim_in_IA
Platinum Member
- Joined
- Feb 14, 2005
- Messages
- 840
- Location
- Eastern Iowa
- Tractor
- Kubota B7610HSD, Mahindra 6500 4WD, JD 440ic crawler, 2 560 farmalls.
Had an idea the other night. My bucket has a tilt guage (wire that sticks out of shoot) to indicate when it is level or tilted down or up. Has anyone ever made a gauge that would tell if you were at grade, above grade, or below grade, and how much with a loader? I was thinking attaching something to one of the cylinders that raise the loader might work in the same fashion, but the length of travel of the gauge would have to be reduced somehow, maybe with a gear roller type reduction. Anyone done this already?