dig it 198t transmition problems

   / dig it 198t transmition problems #41  

AmahastPL

Great info on the transmission and axels. My bucket/stabilizer cylinder is leaking badly now. I called Heartland which goes by gomaverickinc.com now. They were not much help. I gave him the S/N stamped on the cylinder as that is a requirement to get the correct seal kit. He said that was not the correct S/N and he would have to do more research. The seal kit was $130 plus shipping and no returns. I stumbled back onto this thread after several years and saw the mention of Mission Manufacturing and Adam. I decided to give Adam a call and was pleasantly surprised. Adam was very helpful and the S/N I had taken off of the cylinder was good. $83 plus shipping and the seal kit will go out tomorrow. It is a no brainer on whom I will use in the future for my DigIt parts.

Steve
 
   / dig it 198t transmition problems #42  
I just got a dig it 198t and had to replace tj 109 tooth side gear. How much gear lube to you put into the case? All the way up to the vented plug above the axel?
 
   / dig it 198t transmition problems #43  
Anyone have pages F27 and F28 from the manual? I am missing them thx
 

Tractor & Equipment Auctions

44x16 8 Bolt Split Rim and Tire (A49339)
44x16 8 Bolt Split...
Set of (2) Polaris Camouflage Half Doors w/Hardware (A49339)
Set of (2) Polaris...
3149 (A49339)
3149 (A49339)
(16) Rear Tractor Weight Halves (A49339)
(16) Rear Tractor...
Ingersoll Rand PD-24 Double Drum Vibratory Roller - Low Hours/Jobsite Ready! (A48561)
Ingersoll Rand...
New Polaris Razor Roll Bar (A46502)
New Polaris Razor...
 
Top