dirt scoops--and my1401d

[tonyw]

I've convinced my wife that I "need" a dirt scoop to move gravel,wood chips, and dirt around on our property. I tried a 24" scoop onto my 1401d but found it didn't lift high enough to dump--even with adjustments to the lift arms/supports.
I'm wondering if anyone else with a 1401 or smaller has had trouble/or success with a dirt scoop....or if I'm going to need to see a welder.
Thanks

 

[kayssupply]

It is workable. I used one on a YM1300D. It worked fine.

 

[tonyw]

thanks! hmm..maybe it's my lift arms?
thanks

 

[kayssupply]

They had to be made over here. If the lift arms are closer to the rear ( for lifting capacity) then they won't lift as high. You may have to move the attachment point closer to the tractor to gain lift. There isn't a jig for making and mounting them. Most people just eye ball them.

 

[professor]

I have a 1401 with a 24inch scoop and it works fine. I adjust it with the top link.

 

[tonyw]

Thanks for the picture--and the info!

 

[tonyw]

Thanks, Professor!

 

[normde2001]

Make sure your lift arm links are attached in the lower lift arm holes that are closest to the tractor for greatest lift. Normally there are 3 holes.

 

[tonyw]

thank you, Norm!

 

[tonyw]

Thanks to everyone for the "dirt scoop" assistance! My Yanmar dealer had some new 24" scoops on his lot that a local
fabricator made; the frame is slightly smaller than the Howse brand, and it works perfectly with my 1401d! /forums/images/graemlins/grin.gif
It's probably twenty pounds lighter than the Howse, but it's been working fine moving my mountain of gravel!

tony