DIY ballast box

   / DIY ballast box #1  

JimR

Elite Member
Joined
Mar 11, 2004
Messages
3,584
Location
Central Ma.
Tractor
Kioti NX4510HST
I had some fun today making a 3 point hitch ballast weight. $10 barrel, $20 receiver trailer hitch, $32 for the 3 point hitch drawbar and almost $60 for (12) 80 pound bags of concrete. The vertical tubing came from a piece of scrap that I salvaged from an old storage rack end that I have had for 40 something years. All the metal parts were welded together before filling it with mixed concrete. Total weight just over 1000 pounds. When it hardens up I'll make the top link section.
 

Attachments

  • 20231108_145934.jpg
    20231108_145934.jpg
    1,002.1 KB · Views: 142
  • 20231108_150018.jpg
    20231108_150018.jpg
    1,006.9 KB · Views: 149
  • 20231108_153509.jpg
    20231108_153509.jpg
    942 KB · Views: 148
  • 20231108_162218.jpg
    20231108_162218.jpg
    1.2 MB · Views: 194
  • 20231108_174735.jpg
    20231108_174735.jpg
    1.1 MB · Views: 150
   / DIY ballast box #2  
Very cool.
 
   / DIY ballast box
  • Thread Starter
#3  
Thanks
 

Tractor & Equipment Auctions

International Cornplanter (A49251)
International...
Landhonor 40gal 2 Stage Air Compressor (A47371)
Landhonor 40gal 2...
2022 Koshin KTH-50X 2in Trash Pump (A46683)
2022 Koshin...
John Deere 335 Round Baler (A49251)
John Deere 335...
2013 Nissan Pathfinder SUV (A46684)
2013 Nissan...
24ft Corral Panel (A49251)
24ft Corral Panel...
 
Top