Diy compact tractor

[Renze]

Landie rear axle and transmission, and an old field milking parlour engine ? My father ran one similar 40 years ago, a Wolseley just with an open top egg cooker cooling system

 

[chaffe]

Landie rear axle and transmission, and an old field milking parlour engine ? My father ran one similar 40 years ago, a Wolseley just with an open top egg cooker cooling system

Hi, landrover rear axle, however the gearbox is from a Volvo, the engine is one of the more modern lister-petters from the late 1980's to present day, it has good power and revs quite high (upto 3000 rpm) however I do have another much heavier lister LR1 that only revs to 750 and makes a mere 1.5 hp forever!

 

[3930dave]

Hi, landrover rear axle, however the gearbox is from a Volvo, the engine is one of the more modern lister-petters from the late 1980's to present day, it has good power and revs quite high (upto 3000 rpm) however I do have another much heavier lister LR1 that only revs to 750 and makes a mere 1.5 hp forever!

Interesting, I didn't realize the later ones rev'd that high. Is that a factory redline, or unofficial ?

Rgds, D.

 

[chaffe]

Interesting, I didn't realize the later ones rev'd that high. Is that a factory redline, or unofficial ?

Rgds, D.

Standard specification for this engine, still available new now.
LT1

 

[3930dave]

Standard specification for this engine, still available new now.
LT1

Good example of why I hang around here.... always something to learn !

Thanks Chaffe.

Rgds, D.

 

[chaffe]

Good example of why I hang around here.... always something to learn !

Thanks Chaffe.

Rgds, D.

No worries! Not sure it would be a pretty sight at 8bhp! Be a lot of smoke involved!

 

[kcender]

Very interesting project.You seem to be doing it at a good pace.I am very interested in seeing the finished product,good luck with it.

 

[chaffe]

Very interesting project.You seem to be doing it at a good pace.I am very interested in seeing the finished product,good luck with it.

Thanks for the support, it should be getting done much quicker but I'm only managing an hour here and there, a full time job and seven month old baby take priority!
Another hour spent on it tonight, re made some of the clutch parts, much happier now!

 

[Renze]

Didnt know Lister Petter was still in business. old workboats also had Listers, as well as my neighbours irrigation pump.

I guess the bigger engines are based on a Perkins 1000 series ?
http://www.lister-petter.com/documents/product/08418 GWT6-2A VS TDS.pdf

 

[chaffe]

No idea mate, I'm no lister expert. This one is ideal for my needs though