DIY Ignition Switch Cover

   / DIY Ignition Switch Cover #1  

Damifino

Gold Member
Joined
Oct 15, 2008
Messages
254
Location
Central Fl.
Tractor
DK35SE
001.JPG002.JPG I have read alot of posts concerning water getting into ignition switch, I have come up with a simple solution to keep the rain water out if yours stays outside. It consists of a 1" pvc pressure cap and a short piece of 1" Thin Wall Pipe.

This fits snugly on my 2008 DK35, hope it works for you as well.
 
   / DIY Ignition Switch Cover #2  
Here is another idea, using a Gatorade lid, one from the small size bottle, fits almost perfect and is orange too.
The Gatorade lids are flexible plastic and I made a way of making it snug fit, just cut a slot on either side and used some wire to act as a tension for a snug fit.
 

Attachments

  • 0619131627.jpg
    0619131627.jpg
    356.5 KB · Views: 370
  • 0619131627a.jpg
    0619131627a.jpg
    293.1 KB · Views: 356
  • 0619131627b.jpg
    0619131627b.jpg
    344.1 KB · Views: 409
  • 0619131631a.jpg
    0619131631a.jpg
    395.8 KB · Views: 446
   / DIY Ignition Switch Cover #4  
Kioti cover T4837-77772 COVER, STARTER SWITCH PROOF WATER $2.43
 
   / DIY Ignition Switch Cover #5  
Kioti cover T4837-77772 COVER, STARTER SWITCH PROOF WATER $2.43
Party pooper. :cool:
I would have to drive to the dealer, pay, then wait for it to come in, and then drive back to get.
Cool thing is I can take this off and it fits right over the light switch knob for safe keeping when key is in.
 
Last edited:
   / DIY Ignition Switch Cover #7  
Party pooper. :cool:
I would have to drive to the dealer, pay, then wait for it to come in, and then drive back to get.
Cool thing is I can take this off and it fits right over the light switch knob for safe keeping when key is in.

Or you could ask your dealer to give you one as part of PDI completion, FREE! Like I did.:thumbsup:
 
   / DIY Ignition Switch Cover #8  
Or you could ask your dealer to give you one as part of PDI completion, FREE! Like I did.:thumbsup:

My dealer says there are 2 things you never hear him say, "free" and "I am wrong".
 
Last edited:
   / DIY Ignition Switch Cover #9  
I love it... I had thought about using some kind of bottle cap, but hadn't figured out which one to use... will try the Gatorade one as soon as I get home. Thanks GMtb42!
-Mitch
 
   / DIY Ignition Switch Cover #10  
I love it... I had thought about using some kind of bottle cap, but hadn't figured out which one to use... will try the Gatorade one as soon as I get home. Thanks GMtb42!
-Mitch
Glad to help out.
 

Tractor & Equipment Auctions

2012 TEMPLES TRAILER SALES INC FLARE STACK (A47001)
2012 TEMPLES...
Mack Model R Truck (A47369)
Mack Model R Truck...
2023 New Holland C332 Two Speed Compact Track Loader Skid Steer (A45336)
2023 New Holland...
Extra Heavy Duty Powder Coated Hay Feeder (A47809)
Extra Heavy Duty...
80in HD Tooth Bucket with Side Cutters ONE PER LOT (A46878)
80in HD Tooth...
International Cornplanter (A47809)
International...
 
Top