chugger172
New member
- Joined
- Oct 12, 2006
- Messages
- 15
I'd like to upgrade my fuel filter and add a water separator.
What's a good choice?
What's a good choice?
Last edited:
DK 40 fuel filter upgrade
- Thread starter chugger172
- Start date
- Views: 677
Coyote_CS2220
Bronze Member
- Joined
- Feb 1, 2023
- Messages
- 98
- Location
- BC
- Tractor
- 2023 Kioti CS2220, Yale GLP050TG, Husqavarna Z242F, Yamaha XT250, 2017 Desert Point Kennels GSP from Yuma AZ
Racor is pretty much the diesel fuel filter standard. I added one to my GM 6.5TD which was much larger and easier to change out than the built-in engine top filter on the 6.5TD.
I was in Saskatchewan at the time and a heater was required in the winter - even with winter diesel. If you go with a heater element in the unit be sure to use a high amp switch for the heater element as it will draw a fair bit of power and will get hot - best to get a metal power switch. The heater is not designed to heat-up the diesel for the engine, but to ensure cold temperature wax formation in the fuel does not clog up the filter element and restrict flow.
Also, find a location along the fuel line that will make the spin-on/off Racor filters easy to access for change out.
I was in Saskatchewan at the time and a heater was required in the winter - even with winter diesel. If you go with a heater element in the unit be sure to use a high amp switch for the heater element as it will draw a fair bit of power and will get hot - best to get a metal power switch. The heater is not designed to heat-up the diesel for the engine, but to ensure cold temperature wax formation in the fuel does not clog up the filter element and restrict flow.
Also, find a location along the fuel line that will make the spin-on/off Racor filters easy to access for change out.