k0ua
Epic Contributor
Relay is likely. Less likely is the range selector pot. Less likely yet is the cruise module. could be wiring or connectors of course. Corrosion etc..
dk35 se not starting
- Thread starter Jimbrady
- Start date
- Views: 3312
Relay is likely. Less likely is the range selector pot. Less likely yet is the cruise module. could be wiring or connectors of course. Corrosion etc..
k0ua
Epic Contributor
If it is the relay, While I have never replaced one, those that have, report it is a standard relay available at a lower price at about any auto parts store instead of going to a dealer.
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 19,509
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
I was hoping you see this thread James.This stuff is right up your alley.
k0ua
Epic Contributor
Yep, I wish the owners manual had the schematics in it. It would be a big help to at least some of the owners.
Coyote machine
Super Member
- Joined
- May 4, 2009
- Messages
- 7,663
- Location
- Southern VT
- Tractor
- 22 SANY SY 50U, '10 Kioti DK 40se/hst KL-401 FEL, loaded tires, KB-2485 bhoe, Tuffline TB160 BB, Woods QA forks, MIE Hydraulic bhoe thumb & ripper tooth, Igland 4001 winch, & GR-20 Log Grapple. Woods BBX72" Brush Mower. Diamondplate aluminum canopy
That schematic info is all in the service manuals, as it is for just about any tractor/vehicle.
