Dollies For Moving Implements

[Xfaxman]

Thank you XMan, this is the article - it has several upgrades I plan to make. Saw your wood storage dolly and want one of those also. Its always an educational tutorial when I read your posts. Thanks for taking the time to share your knowledge.

Young in South Louisiana

For those that didn't see it: https://www.tractorbynet.com/forums/build-yourself/422412-my-lumber-plywood-cart.html?highlight=

 

[Xfaxman]

Since this old thread got revived for new eyes, here is one I made from 2x6s:

View attachment 649661 View attachment 649662

View attachment 649663 View attachment 649664


-----------------------------------------------

Just found out today the dolly will also hold the 3 point adapter:

Ready for moving dirt:

 

[kubotaboyd]

I bought a harbor freight $40 platform dolly for my middle buster. Works better than I could have hoped.

 

[RalphVa]

Latest one for the new WC46 chipper, made from the bottom of it shipping box metal reinforcement.

Ralph

 

[Xfaxman]

Here is one made from the bottom of an old office chair, scrap 2x3 and a small dolly that had the casters removed for use on another project:

The 48 inch bale spear:

The 34 inch stabilizer added:

They fit into the Omni Mfg. Transformer 3 point receiver hitch:

And mounted on the 3 point:

Moving a 5x6 round bale:

 

[tmcj]

I used 2 dollies tagged together for the bucket and a smaller one for the support stand. The rear blade sits on some car dollies and a transmission jack. Both are easy to move around as needed.

 

[RjCorazza]

I used 2 dollies tagged together for the bucket and a smaller one for the support stand. The rear blade sits on some car dollies and a transmission jack. Both are easy to move around as needed.View attachment 688882View attachment 688883

I use those exact vehicle dollies for several different plows. They work great!