3-Point Hitch Draft control

   / Draft control #1  

sgipson

Member
Joined
Apr 26, 2009
Messages
25
Location
south mississippi
Tractor
ford 3600 1974
I have an M5040 with FEL. When using a boxblade and pushing trash in reverse the lift arms will move up when pressure is applied leaving pieces behind. Is this a draft setting problem or what? I have tried the draft control lever up and down with no changes. It also seems to be more sensitive when in forward pulling trash etc.
 
   / Draft control #2  
3 Ph does not have down pressure... it floats

try extending your top link... and maybe add some weight to the box blade

Draft has nothing to do with it
 
   / Draft control #3  
I think what you mean is "position control" ..it allows you to set the level of the 3ph but it as mentioned it is still going to float...the position lever lets you hold it up anywhere between all the way up and all the way down...
 

Tractor & Equipment Auctions

1999 Volvo VN Truck, VIN # 4VG7BBRFXXN772814 (A51572)
1999 Volvo VN...
New/Unused 7ft 10 Drawer Stainless Steel Workbench (A51573)
New/Unused 7ft 10...
2016 FORD F-150XL SINGLE CAB TRUCK (A51406)
2016 FORD F-150XL...
NEW Wolverine Skid Steer Drive and Augers (A53002)
NEW Wolverine Skid...
2015 Chevrolet Tahoe SUV (A50324)
2015 Chevrolet...
2016 TAKEUCHI TL8 SKID STEER (A51242)
2016 TAKEUCHI TL8...
 
Top