Draw bar question

[LouNY]

My Branson 8050 has the round 7 pin as I recall this is how it is wired;
https://dbve060ocfe16.cloudfront.net/ts1545118609/attachments/Page/52/7%20pin%20round%20large%20plug%20and%20socket.jpg
The normal 7 blade US is this way;
https://encrypted-tbn0.gstatic.com/...6O5oDdLZ2kupnlANtvQXHu0D0PGkXUjNE1xuQxAQrrU8D

Several differences, I do know that our Magnums have a different pin out from my Branson.
They work on the discbine and chopper and round baler.

 

[oosik]

Morty255 - no on the trailer brake controllers. Those wires off the 7 prong socket terminates at a plug in fixture. There would have to be provision made for any brake controller. Type to obtain, where to locate the controller, wiring into power and the controller plug fixture.

I would almost be 100% certain that they do not function along with the tractor brakes. But I really don't know. The Kubota Owners Manual doesn't speak volumes in this area. And I've never considered any type of braking system for my farm wagon.

 

[WranglerX]

Brave new world of putting lights on farm trailers, towed implements....

Dale

 

[oosik]

Hey - I'd plant a coconut tree in my farm wagon and hang a monkey from the fonds if it would keep the idiots & morons off my AZZ. The few times I've been out on the county road - it's like a magnet.