jml755
Silver Member
Re-reading the post, I took a look at the TC35 link in one of the comments and noted it has the same issue as my TC45. I also noticed that the claim is that the Pentagon bolt is 9.5 mm which is impossible to find a socket for. The 10mm I bought appears to fit snugly. The bolts were tight and now I see that I need to remove them to get to the 3 o-rings that are likely the culprit on 2 of the ports. Hopefully, the 10mm will do the job. I'll find the parts first and then decide if I'll attempt this job on my own. I use the tractor every day to clean my horse barn so I really can't afford to have it down IN the barn (blocking the aisle) OR at a dealership for repairs for any length of time. The repair "sounds" easy but I'll update the thread on status as I go.