Dump truck tarp arms L bend

   / Dump truck tarp arms L bend #1  

AlanB

Elite Member
Joined
Jan 2, 2004
Messages
2,550
Location
Clarksville, TN, USA
Tractor
NH 1925
When looking at Dump truck tarp systems, a lot of them (most that I see) have the arm on the side in the shape of an L instead of just straight.

I am sure there is an advantage to this design, I just do not see what it would be. I was thinking it would be a height thing but that does not seem right.

Thanks for the insights.
 
   / Dump truck tarp arms L bend #2  
Alan,
I think it has to do with the hydraulic cylinder that pushes and pulls the cover open/closed. With the "L" design, the cylinder can be shorter and have more leverage to unroll the tarp against the spring tension.
If you draw the two (straight and "L) designs on paper in the open and closed positions I think you will see what I am talking about.
 
   / Dump truck tarp arms L bend #3  
Actually the L bend positions the arm down below the side of the truck so it won't be damaged when loading from the side. I have loaded trucks both ways and it is much easier to load the L bent ones.
 

Tractor & Equipment Auctions

UNUSED CFG INDUSTRIAL MX15RX EXCAVATOR (A52706)
UNUSED CFG...
2011 TROXELL COMPANY 130BBL VACUUM TRAILER (A53843)
2011 TROXELL...
John Deere BD1108 (A50123)
John Deere BD1108...
PALLET OF 15-BLACK GROUND PROTECTION MATS. 4FT X 8FT (A53843)
PALLET OF 15-BLACK...
2019 INTERNATIONAL LT625 TANDEM AXLE SLEEPER (A54313)
2019 INTERNATIONAL...
HAMM 3205 SMOOTH DRUM ROLLER (A51242)
HAMM 3205 SMOOTH...
 
Top