EA Pallet Forks

KBinCT · Mar 24, 2015

Got some 42 Inch Pallet Forks from Everything Attachments today. I had to pick them up from the freight terminal and all the way home I was thinking crap, I ordered the wrong ones as they looked so small. Once I got them home and on my Kubota L3901 everything was A-OK. They look perfect on my L3901 and should come in very handy over the years. These are the ones I bought https://www.(Temporarily blocked du...e)/ProductDetails.asp?ProductCode=ETA-SCPF-42

aeblank · Mar 25, 2015

Man, those are the 42"? Those are the ones I WANT SO SO BAD, but gosh they look long.
Probably getting some (though from my dealer, as they're cheaper than EA) in the next few weeks.

Xfaxman · Mar 25, 2015

Yep, they look longer than 42".

The mounting frame should be about 44" wide, if it is SSQA.

KBinCT · Mar 25, 2015

I just measured the forks, they're 42.25" long.. The frame is 45.5" wide outside to outside. Didn't measure the inside of the frame.

Xfaxman · Mar 25, 2015

KBinCT said:
I just measured the forks, they're 42.25" long.. The frame is 45.5" wide outside to outside. Didn't measure the inside of the frame.

Ok, guess it is an optical delusion.

k0ua · Mar 25, 2015

They look like a great fit for your machine. It is what I would have ordered.:thumbsup:

Tomtint · Mar 25, 2015

I was just about to post a question about clamp on forks. The ones that go clamp to the bottom of the bucket. Won't they cause the lower edge to bend ? I use a set of Cat Skidsteer forks on my L3700, but they are very heavy, I'm guessing 300 pounds +\-. This severely eats up the lift ability of my loader. I was thinking about other options.

k0ua · Mar 25, 2015

Tomtint said:
I was just about to post a question about clamp on forks. The ones that go clamp to the bottom of the bucket. Won't they cause the lower edge to bend ? I use a set of Cat Skidsteer forks on my L3700, but they are very heavy, I'm guessing 300 pounds +\-. This severely eats up the lift ability of my loader. I was thinking about other options.

Tom, I had a set of clamp on forks on an L3400HST, same tractor as yours, and while they did work and were useful to an extent, It did mark up the bucket a little. And you can't see worth a crap to get hooked up. I was extremely happy when I bought the SSQA option and got some SSQA pallet forks. A huge difference in usability.

Tomtint · Mar 25, 2015

k0ua said:
Tom, I had a set of clamp on forks on an L3400HST, same tractor as yours, and while they did work and were useful to an extent, It did mark up the bucket a little. And you can't see worth a crap to get hooked up. I was extremely happy when I bought the SSQA option and got some SSQA pallet forks. A huge difference in usability.

Thanks.. Didn't think about the lack of visability.

PILOON · Mar 26, 2015

One option is to add a back up camera system.
They all have the option for a second camera and sell for between $50-$100.
Lots of talk on some TBN forums.