ns_in_tex
Platinum Member
- Joined
- Mar 24, 2002
- Messages
- 914
- Location
- East Texas
- Tractor
- Kubota L4610 HSTC, International 2400, Hesston 1280,
I bought a digital outdoor thermometer from walmart for about 10.00 that has a thermister type sensor. Ran the remote sensor down through a hole in the cab floor & taped it to the side of the hydraulic oil filter, then strapped some rubber insulation over it. It seems to work OK. The reason I did this was because I built a extendible side mount mower for my fel & power it with a hydraulic motor. I wanted to be sure I didn't overheat my oil with the continous use of the hydraulics.