Electrical Connector domestic vender help!
- Thread starter MinnesotaEric
- Start date
- Views: 6406
lostcreekranch
Super Member
- Joined
- Dec 14, 2012
- Messages
- 8,078
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
Eric;
Perhaps you cut the odd ball connector off and replace with a set of these square trailer connectors?
https://www.etrailer.com/Wiring/Hopkins/37995.html
Added: Under $6 for both sides of plug.
Sent from my iPad using TractorByNet
Perhaps you cut the odd ball connector off and replace with a set of these square trailer connectors?
https://www.etrailer.com/Wiring/Hopkins/37995.html
Added: Under $6 for both sides of plug.
Sent from my iPad using TractorByNet
Last edited:
hr3
Veteran Member
Good idea Skyhook....
CCWKen
Veteran Member
- Joined
- Mar 22, 2005
- Messages
- 1,199
- Location
- South Texas, USA
- Tractor
- Ford-3910, JD-420C, Kenbota-Custom, IH-2606
Before I'd spend bucks on trying to match that plug, I'd buy a 6-pin Molex male and female and cut that dang thing off! :dance1:
Added: Here's Weatherpack pair for under $7. Weather Pack 6 Pin Sealed Wiring Connector Kit - HiPo Parts Garage
Added: Here's Weatherpack pair for under $7. Weather Pack 6 Pin Sealed Wiring Connector Kit - HiPo Parts Garage
Last edited:
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 63,317
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
If he cuts anything off the seat, he can't return it if it doesn't work out as a comfortable seat.... 
s219
Super Member
- Joined
- Dec 7, 2011
- Messages
- 8,607
- Location
- Virginia USA
- Tractor
- Kubota L3200, Deere X380, Kubota RTV-X
That's what I would do, and one benefit in this case is that you can most likely slide the blades out of that plug pretty easily without breaking anything. So you could put back to normal if the seat needs to be returned. Normally you can use a thin awl or probe/pick to release the locking tabs holding the blades in, and they will slide out easily.
OP
MinnesotaEric
Super Member
Thanks guys. As it is, I'm paying the shipping and restocking fee and sending the Grammer seat back.
Steave
Platinum Member
- Joined
- Mar 1, 2012
- Messages
- 853
- Location
- Taylorsville, GA
- Tractor
- 3000 Ford 66' 260A International Backhoe, Belarus 250AS
If you still have your seat here's another # to check from mousers.
571-480003-5 $1.09 + 7.99 shipping ups.
571-480003-5 $1.09 + 7.99 shipping ups.
Last edited:
OP
MinnesotaEric
Super Member
That sure looks like the plug. The seat isn't going to work out for me and I plan to return the seat on Thursday. Even so, thank you for your leg-work!