Engine Break In

   / Engine Break In #1  

paccorti

Gold Member
Joined
May 21, 2000
Messages
481
Location
Hillsboro Virginia (near Purcellville)
Tractor
TC35D with 16LA Loader
I'm wondering if I should put synthetic engine oil in my TC35D for it's 50 hr service. The reason I ask is that my Subaru seemed to have trouble breaking in when I started with syn oil right from the start. Basically it consumed (never did see smoke or drops on the floor) about 1 qt of oil every 7500 miles all the way till 45,000 miles. On a hunch I tried regular oil for the next oil change and my oil consumption totally stopped. So what do you people think, will my engine be broken in enough?
 
   / Engine Break In #2  
Nope. Try about 150 hours.
 
   / Engine Break In #3  
paccorti,

I mentioned switching to syn to my NH dealer and he and a service guy suggested waiting until 100 or even 150 hours so that the engine would be properly broken in. The 150 mark is also the # I've read on this board.

Good Luck, JimBinMI

We boys and our toys!
 

Tractor & Equipment Auctions

Morooka MST 660VD Tracked Dump Truck (A51039)
Morooka MST 660VD...
2012 Ford F150 Crew Cab Pickup Truck (A50323)
2012 Ford F150...
2015 Freightliner Ambulance (A50323)
2015 Freightliner...
2009 Ford F-250 Pickup Truck, VIN # 1FTSX21Y49EA41686 (A48836)
2009 Ford F-250...
2004 Chevrolet C5500 Shuttle Bus (A50323)
2004 Chevrolet...
PALLET OF SQUEEZE OFFS (A50854)
PALLET OF SQUEEZE...
 
Top