Engine Break In

   / Engine Break In #1  

paccorti

Gold Member
Joined
May 21, 2000
Messages
481
Location
Hillsboro Virginia (near Purcellville)
Tractor
TC35D with 16LA Loader
I'm wondering if I should put synthetic engine oil in my TC35D for it's 50 hr service. The reason I ask is that my Subaru seemed to have trouble breaking in when I started with syn oil right from the start. Basically it consumed (never did see smoke or drops on the floor) about 1 qt of oil every 7500 miles all the way till 45,000 miles. On a hunch I tried regular oil for the next oil change and my oil consumption totally stopped. So what do you people think, will my engine be broken in enough?
 
   / Engine Break In #2  
Nope. Try about 150 hours.
 
   / Engine Break In #3  
paccorti,

I mentioned switching to syn to my NH dealer and he and a service guy suggested waiting until 100 or even 150 hours so that the engine would be properly broken in. The 150 mark is also the # I've read on this board.

Good Luck, JimBinMI

We boys and our toys!
 

Tractor & Equipment Auctions

NEW 2022 Load Trail CH 83IN x 18FT Equipment Trailer (A52128)
NEW 2022 Load...
2025 Single Cylinder 40in Grapple Rake Mini Skid Steer Attachment (A50322)
2025 Single...
2019 FORD F-150 XL SINGLE CAB TRUCK (A51406)
2019 FORD F-150 XL...
2017 GENIE GTH-636 TELESCOPIC FORKLIFT (A51242)
2017 GENIE GTH-636...
2018 LAYMOR SM450-ST SWEEPER (A51242)
2018 LAYMOR...
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A50322)
2025 Kivel 48in...
 
Top