Everything Attachments

[BGigHarbor]

What do you think any issues would be with adding hydraulic angle to the ETA XTreme Duty 6 way Tractor Scrape Blade?

Weld in some brackets for a cylinder? Other issues you see?

some blades (like the LPs) come hydraulic or manual, all ready to accept a cylinder. hint hint

 

[tomfifield]

I got the pine straw rake today and put it together. I tried it out on an lawn area, it raked up the leafs and even raked some stuff I did not think it would, so it does the job better than I thought it would.

 

[BGigHarbor]

Any status on the timeline on a landplane that adjusts for blade wear, etc, that ted says will be coming in the vid from last year?

 

[EverythingAttachments]

Any status on the timeline on a landplane that adjusts for blade wear, etc, that ted says will be coming in the vid from last year?

That is on his list. We don't have a timeline but he is working hard to develop new attachments and broaden our line-up. A hydraulic scrape blade will probably also be added in the future.
Thanks for your business and interest in our attachments!!

 

[EverythingAttachments]

I got the pine straw rake today and put it together. I tried it out on an lawn area, it raked up the leafs and even raked some stuff I did not think it would, so it does the job better than I thought it would.

I'm glad it worked good for your leaves. Thanks for sharing!!

 

[engine29]

I purchased a 50" wicked grapple a few weeks ago for my Kioti CK30. Used quite a bit last week to clean up a lot of trees (poplar) I had to have taken down. Worked very well, a lot easier than just forks which I used before.
The grapple is nicely built and is a good fit for that size tractor.

 

[EverythingAttachments]

I purchased a 50" wicked grapple a few weeks ago for my Kioti CK30. Used quite a bit last week to clean up a lot of trees (poplar) I had to have taken down. Worked very well, a lot easier than just forks which I used before.
The grapple is nicely built and is a good fit for that size tractor.

Great! That is a perfect match. I'm sure everyone would love to see pics. You can post them on this thread or the Single Lid Wicked Grapple thread if you get a chance.
Thanks for your business and feedback!
Travis

 

[jpaeye]

Travis,

When can we expect to see bigger versions of the EA aerator? We have a 36" and 48" and your videos hint at bigger models to come in the 60" and 72" range. I have (unfortunately sometimes) 12 acres of lawn to care for and need the bigger aerators.

Really would like to purchase soon and just wondered if we can have an ETA on the bigger models? Thank you Travis and Tell Ted thanks as well. Really love all you guys do, especially all the videos!

 

[EverythingAttachments]

I sold a 60" last week. It will weigh about 1,250 pounds and should be ready next week. I'll post pics when it's complete.
It will be cat 1 & 2 quick hitch compatible.
I'll PM the price to you.
Travis

 

[TomSeller]

. I have (unfortunately sometimes) 12 acres of lawn to care for and need the bigger aerators.
!

You can get the 4 legged kind with that much grass.

 

[66chevelle]

Confusion on which rock grapple to get for a MF1635, 35HP, DL120 loader with 1900 lift capacity .. The 50" single or 60" dual cylinder ?
Thanks

 

[EverythingAttachments]

Confusion on which rock grapple to get for a MF1635, 35HP, DL120 loader with 1900 lift capacity .. The 50" single or 60" dual cylinder ?
Thanks

That can be, and has been, debated for days, even weeks. You will maximize your lift capacity with the 50" single, but the dual lids can be nice for uneven loads.
The ultimate decision comes down to your personal preference. The design and quality of both styles is outstanding!!
Travis

 

[FTG-05]

Does EA make or sell anything like the Ratchel Rake? I've got about 12 acres I need to clear of brush and small trees.

I like the Ted and Peanut videos, they are very useful to me!

Thanks,

 

[EverythingAttachments]

No, but the Wicked Grapple will work great for that purpose if you can budget it.

 

[james2]

I HAVE A 1997 KUBOTA L2500 ---LOOKING FOR A BACKHOE ATTACHMENT-ANY IDEAS?? TKS JIM IN KASILOF AK

 

[EverythingAttachments]

This 3pt backhoe will fit your tractor just fine.
Give us a call or send a PM with your zip code for a shipping quote.
Travis

 

[james2]

zip is 99669

 

[EverythingAttachments]

Thanks, I sent you a PM with the shipping quote.
Travis

 

[Kioti Tom]

I am at an event south of Yadkinville, NC, and I took today off to go see my sister in Gastonia. I of course stopped
for the 3rd time at Everything Attachments in Newton, NC.
I got there and was talking to Jerry and Travis who I usually deal with came out and recognized me and came over.
I ended up buying a 4" and a 9" augers for my PHD. Travis and I looked at the turntable that Ted was doing video
of and that EA Value Back Blade looks pretty good. Lots of adjustments available and the 3 pt modified to accept
the quick hitch. If I ever break the KK I have, I know what to replace it with...:thumbsup:. As we went outside to
see if they had any of the augers I wanted on site, I got to look at "The Beast". That Is one awesome piece of
equipment. Huge is not the word for it....:drool:. Anyway, since they can go UPS, I went that way so I did not
have them roling around in the back of my PU. right to my door and no effort on my part.
If you are ever in the area, I strongly recommend that you stop by and talk to the guys and see what they have
going on. They do the finish work there before shipping. had a number of large BB hanging so they could easily
put the scarifiers on. Had a Wicked Grapple ready for shipping pickup and lots of stuff in the yard waiting for you
to order.
HAVE FUN EVERYONE, There is a Tractor and Pieces of equipment out there somewhere for you...especially in
Newton, NC>..

Tom

 

[PRF]

Hey fellas,

Any problem using these forks on my 5740? I like the lighter weight, but the manual says only up to 40hp.

Bradco Compact Tractor Loader Pallet Forks, Model Universal Skid Steer Quick Attach

Thanks..