EverythingAttachments
Elite Member
It's located here: Potato Plow | Middle Buster by Everything Attachments
The Leinbach is no longer available because their factory has closed down.
Travis
Everything Attachments
- Thread starter Muhammad
- Start date
- Views: 952270
- Status
It's located here: Potato Plow | Middle Buster by Everything Attachments
The Leinbach is no longer available because their factory has closed down.
Travis
EverythingAttachments
Elite Member
It's located here: Potato Plow | Middle Buster by Everything Attachments
The Leinbach is no longer available because their factory has closed down.
Travis
jdoff
New member
I'm close to ordering the Value Scrape Blade 2.0 but have a question about the cutting edge. It looks quite steeply angled and as if it would dig aggressively on a gravel driveway. Can you comment on this? What have customers' experiences been with this blade?
I'd be buying the 5' version for use with my 28-hp Cub Cadet 6284.
I'd be buying the 5' version for use with my 28-hp Cub Cadet 6284.
EverythingAttachments
Elite Member
The angle of the cutting edge should be similar to most all blades on the market with reversible/replaceable cutting edges.
The aggressiveness can be adjusted by shortening/lengthening your toplink.
Our 6 way value blade would be great on your little Cub.
Travis
CBW1999
Platinum Member
- Joined
- May 11, 2008
- Messages
- 832
- Tractor
- Kubota 7510, Toro Groundsmaster 217D
Wanted to say thank you after purchasing your 60 inch box blade.
I've only been able to play around a little bit so far and I love it. I am very happy with my decision- it will make things a lot easier as I continue my projects.
I've only been able to play around a little bit so far and I love it. I am very happy with my decision- it will make things a lot easier as I continue my projects.
EverythingAttachments
Elite Member
Astrotrainer
New member
Can you recommend a size of box blade for a New holland 1715 27hp with 4 WD? I have 6 foot finish mower and like the idea that a 6ft box blade would cover my wheel tracks but don't want tooverload the lift capacity. Also I live 30 minutes south of Houston and would pick it up from the freight depot. If you could estimate what that cost I'd appreciate it!
TomSeller
Super Member
6 foot might be a bit much for 27 HP, particularly loaded up. What is your outside tire distance? I have been bogged down with 60 HP on a 6 foot, scarifiers down.
EverythingAttachments
Elite Member
Tom has asked the best question. Let us know the outside width of your rear tires and we'll recommend the best size.
Shipping for a 5-6' box blade to Fed-Ex Freight on Orem Dr. in Houston would be around $30.
Travis
Shipping for a 5-6' box blade to Fed-Ex Freight on Orem Dr. in Houston would be around $30.
Travis
BrickSiloFarm
New member
Can you recommend a cat 1, 3-point cultivator for a subcompact 25 HP Case IH DX25E? Looks like I have a limited cat 1 hitch? I can handle a Farm King 500 snowblower just fine but the 3-points fit lower than on the King Kutter cultivator I looked at. Thanks! Another option is to get a larger sleeve hitch version and get a triangle mount to marry the two together, but I want to avoid that.
Last edited:
- Status
