Everything Attachments

[EverythingAttachments]

That really isnt a bad price, I assume it is mostly "burn time" on the laser table

I think it's really fair. Basically covers the cost of material, laser time, packaging, shipping.
Travis

 

[heavy hammer]

A couple weeks ago moving some large rounds of ash

 

[MinnesotaEric]

It has been a while since I parked a Wicked Root Grapple video, so I thought I'd share my annual slash burn video while also showing those of you in fairer climates how we're starting our 2020 winter here in North-Central Minnesota in October.

 

[Todd727]

Travis

Travis,

I purchased a Bradco 84" bucket with the weld on teeth, part #18453 from my local dealer. At the time, I guess Paladin wasn't shipping them with the side cutters. Can I order the side cutters and bolt kit from you?

 

[Frankenkubota]

It has been a while since I parked a Wicked Root Grapple video, so I thought I'd share my annual slash burn video while also showing those of you in fairer climates how we're starting our 2020 winter here in North-Central Minnesota in October.

That is exactly how i punched the grill outta my new mx tractor. It's fun but ya gotta be careful!

Is that lab wearing a coat?

 

[BRMyers]

Yes, the lab was, it is lab coat.

 

[heavy hammer]

Nice video, and lab

 

[EverythingAttachments]

Travis,

I purchased a Bradco 84" bucket with the weld on teeth, part #18453 from my local dealer. At the time, I guess Paladin wasn't shipping them with the side cutters. Can I order the side cutters and bolt kit from you?

Hey Todd,
I don't see why not. If you call 828-464-1200 and ask for parts, I'm sure the guys can fix you up.
Travis

 

[GMAK]

It has been a while since I parked a Wicked Root Grapple video, so I thought I'd share my annual slash burn video while also showing those of you in fairer climates how we're starting our 2020 winter here in North-Central Minnesota in October.

Nicely done, we did much the same over the Holidays. Something about a big fire, snow, and a few cold ones.

 

[Scrambler82]

Does EA have Clamp-On Forks.

My Tractor is small but I'm thinking something around the 2 to 3K rated lift Forks and approximately 48" working length, 60"+ overall.

Thanks