Loader Factory SSQA bracket for MT125 and MT122 LL1101 loader

[mxr662]

Can you provide the part numbers of what you got?

 

[mslisaj]

Here you go: the bucket is a MT40404031 and the SSQL tractor mount is a MT40404033.
While I ordered these numbers through my New Holland dealer they are actually LS numbers interestingly enough.

 

[The Colour Blue]

Here you go: the bucket is a MT40404031 and the SSQL tractor mount is a MT40404033.
While I ordered these numbers through my New Holland dealer they are actually LS numbers interestingly enough.

Great info. Thanks! Id love to have the SSQA conversion too. Do you have the LL1101 loader on your MT125?

 

[mslisaj]

I have the LL1100 loader.

 

[The Colour Blue]

I have the LL1100 loader.

Do you know if there is a difference? Do you know if the LL1101 take the SSQA mount on thr loader?

 

[mslisaj]

Dimensionally at the pins it's the same loader. I don't know what the differance may be between the LL1100 and the LL1101. I'm actually buying this mount from my New Holland dealer. As I have mentioned before I don't have an LS dealer locally for over 200 miles but I do have a New Holland dealer and their Workmaster 25S is the exact same tractor as the MT125.

I read on another forum the LL1101 was the loader with the SSQA but I don't know this for a fact. I'll have the QA mount here in another week or so and I'll get it on the tractor then.

 

[The Colour Blue]

Dimensionally at the pins it's the same loader. I don't know what the differance may be between the LL1100 and the LL1101. I'm actually buying this mount from my New Holland dealer. As I have mentioned before I don't have an LS dealer locally for over 200 miles but I do have a New Holland dealer and their Workmaster 25S is the exact same tractor as the MT125.

I read on another forum the LL1101 was the loader with the SSQA but I don't know this for a fact. I'll have the QA mount here in another week or so and I'll get it on the tractor then.

That’s great. Thank you for the quick replies. If you get a chance, can you post more info and pictures? Im looking into things for my 125 here in Ontario at the moment.

 

[mslisaj]

As soon as I get it installed I'll happily post pictures as you all have been very helpful.

 

[sneyeper]

I wish there was another source to purchase the SSQA than a NH dealer. The closest one, an hour away, is horrible and provides zero service.

 

[mxr662]

I have the LL1101 and it did not come with the SSQA. There are other threads on here that describe the factory quick hitch that comes with the MT125 as smaller than standard size.

Post in thread 'Buying Advice - LS MT122' Buying Advice - LS MT122