fail

[barbutet]

hi,
from the command post, levers raise and lower the elevador.si it does from the outside buttons work.
We have revised the potentiometer, and appears to be ok
Error 24 appears.
As can be removed?
We tested a method other tractors, but do not know exactly what to do. think it must be something to synchronize or calibrate correctly.
Thanks for your help

 

[boggen]

other post, looks to be duplicate of this. counting it off as newbie doings...
failure elevators new holland m100
http://www.tractorbynet.com/forums/...-new-holland-m100.html?highlight=#post3925779

i am completely lost of what ya describing or asking help with. i have no access to error codes. you might try contacting a local dealer, and see if they be willing to look the error code. vs buying a shop/service manual. though will still urge you getting shop/service manual, they can be very handy for a DIY'er (do it yourself type of person)

--operators manual, goes through basic operation of tractor, type of fluids and amount, filter specs.
--parts manual can be found at newholland website. seeing your in spain, just go to there main website, and work your way to "parts catalog" it is not the best of things for diagrams, but does give some diagrams and part numbers.
--shop / service manual, would give full break down of error codes, exploded diagrams, and detailed text of diagnosing, tearing stuff apart and putting it back together, while checking things as ya went through it all. shop/service manuals tend to be rather costly compared to the other 2 manuals.