Farmtec/Long Ignition Help

[MelroseFred]

I’m really new to tractors. Have a Long 350 that ran rather well. I allowed my son to use it and when I went to start it up again, there were two longer brown wires hanging down by the brake pedal. I tried to start the tractor but the push button didn’t do anything. I took the dash loose and realized the two brown wires were for the ignition switch. I checked voltage on the side that was still connected and it showed 12.39V. When I push in the starter button, I get the same 12.39V on the brown wires. The problem is there are cut wires everywhere and I have no idea where the brown wires go to start the engine. I’ve attached pictures of the push button (with wires) along with a picture of the starter (The wire hanging from the starter I think was already like that.). Anyone have any idea where the brown wires should connect?