Fastener Supply

[SLOBuds]

Just bought a L35 and want to establish a fairly comprehensive set of replacement parts. Stuff that breaks or wears out.

What is recommended - or how would I go about laying that out?

Do I need to measure each pin - or are these all standard sizes?

I've got L35 with standard loader and backhoe, plus box scraper, plus brush hog.

Thanks

 

[Texas Dodge]

Don't break it

 

[Wayne County Hose]

Most manufacturers have a recommended spare parts list for a particular model of equipment. Contact your salesman, he should be able to point you in the right direction.

Warning: These lists usually have loads of stuff on it, you will have to go thru it and decide how much money you want to spend.

 

[btolle]

The only spare parts I keep are a set of filters (engine and trans), and engine and trans oil, and a bunch of lynch pins and hairpins of a couple of sizes.

Bill Tolle

 

[texasjohn]

I've broken a couple of grease zerks on my FEL... and got a set of replacements from HF.. .they have an assortment for not much $$

Also, an easy-out that fits the busted zerk would be good to have, just in case. You WILL need it if you break one.. HF, also, has a set of easy-outs... I think 5 different sizes, also not many $$.

Works for me. Other than that, oil, filters, grease gun, rags, should do the trick.