FEL Lubrication

ericbx1500 · Sep 19, 2005

Looking in my owners book(la181)is say's to grease the fittings every 10 hours of use which I do. But it also says lubricate joints of control lever linkage every 10 hours /forums/images/graemlins/confused.gif What joints are they talking about /forums/images/graemlins/confused.gif

ronjhall · Sep 19, 2005

<font color="blue"> control lever linkage </font>= FEL Joystick control linkage.

ericbx1500 · Sep 19, 2005

How do I access it. Do i have to pull the cover off? Is there a zerk fitting?

SkyPup · Sep 19, 2005

Take the cover off and spray the mechanisms with white lithium spray grease. I only do it about once every 50 hours or so though.

ericbx1500 · Sep 19, 2005

I’m assuming we are talking about the black cover that’s held on by four Philip head screws. Looks like I have to remove the battery cover (radiator pre screen) to access the inside lower screw?

ronjhall · Sep 19, 2005

Here is a picture I borrowed from <font color="orange"> Kubota's </font>site. The driver has his right hand on Joystick. Lube the linkage at other end of stick. Yes you may need to remove cover.

lmiller · Sep 26, 2005

What's the trick to getting off the cover on the LA 402 loader?
I sure would like to grease the linkage, now that I know where it is /forums/images/graemlins/crazy.gif, but I can't figure out how it is clipped on.

Lou

ronjhall · Sep 26, 2005

My FEL has a metal cover over the linkage. It can be removed by removing 3 bolts that hold it on under the valve mounting bracket.

lmiller · Sep 27, 2005

My loader valve has a black plastic cover on top. It looks like I have to take that off to get to the linkage, but I can't figure out how it is attached. I'll take some pictures but it will be about 2 weeks.

Lou