Fender tool box 5075 E

[triplemoutdoors]

What tools should I keep in the fender mounted tool box? Looking for your opinion and experience. I would like to get the tools in there before I'm in the field and realize I need a tool. Thanks in advance or your help.

 

[AKfish]

Small hammer, pliers with a wire cutting jaw, 8" crescent wrench, 12" crescent wrench, various box end wrenches that fit the hydraulic hose fittings and couplers, large phillips head screwdriver and blade screwdriver, handful of snap pins for 3pt attachments, spare top link pins, couple of grease rags, cotter pins, small roll of wire.

Probably a couple of other things I've forgotten...

AKfish

 

[moored4]

What tools should I keep in the fender mounted tool box? Looking for your opinion and experience. I would like to get the tools in there before I'm in the field and realize I need a tool. Thanks in advance or your help.

Try this latest link for tool box contents! Has just what your looking for. :thumbsup:

http://www.tractorbynet.com/forums/owning-operating/240922-whats-your-tractor-toolbox.html

 

[triplemoutdoors]

Good stuff...thanks for the link to the current thread. Does anyone know if the fittings and bolts on the 5075E are metric or standard? I guess I could get a couple of metric crescents for the tool box.

 

[SI2305]

My thoughts would be on multi-use tools
* leatherman or similar
* vice-grips/locking pliers
* crescent wrench
* hammer, dead-blow hammer--delivers surprisingly hard force from a small tool and all that I
have seen are designed to not ruin metal
* various assorted pins
* small roll of bailing wire
* duck tape--can't be specific, but it is just so darn useful


Any, all or none--just my thoughts

SI2305