finally...

   / finally... #21  
</font><font color="blue" class="small">( the actuator lever. I also wanted to know how does one plug the hydraulic lines when I pull them apart to disconnect the grapple.
I have a latex glove over them currently. )</font>

For those who can't see it in the small picture, the lever appears to be the standard one used for the rear SVC. A different view of the lever located at the right-front corner of the seat. You can see the 3PH lift lever just slightly above & behind the 3rd SVC lever.

As for capping the lines, Deere should sell the rubber plugs as seen in this picture
 
   / finally... #22  
</font><font color="blue" class="small">( the actuator lever. I also wanted to know how does one plug the hydraulic lines when I pull them apart to disconnect the grapple.
I have a latex glove over them currently. )</font>

For those who can't see it in the small picture, the lever appears to be the standard one used for the rear SVC. A different view of the lever located at the right-front corner of the seat. You can see the 3PH lift lever just slightly above & behind the 3rd SVC lever.

As for capping the lines, Deere should sell the rubber plugs as seen in this picture
 
   / finally... #23  
Love the grapple and tractor, I have been toying with steeping up to a 3120 or a bit larger, I have a 4110. Which brings me to my question would a 4110 handle a graple this size. I cut wood to heat my house and handle large long large logs and a graplle would be handy, thanks for letting me on this thread.

Roger
 
   / finally... #24  
Love the grapple and tractor, I have been toying with steeping up to a 3120 or a bit larger, I have a 4110. Which brings me to my question would a 4110 handle a graple this size. I cut wood to heat my house and handle large long large logs and a graplle would be handy, thanks for letting me on this thread.

Roger
 
   / finally...
  • Thread Starter
#25  
I do have a TSC near by I'll see what they have, I need to get em capped thats for sure. Thanks
 
   / finally...
  • Thread Starter
#26  
I do have a TSC near by I'll see what they have, I need to get em capped thats for sure. Thanks
 

Tractor & Equipment Auctions

INGERSOLL RAND AIR IMPACT (A55745)
INGERSOLL RAND AIR...
2020 Case-IH 250 Magnum (A53314)
2020 Case-IH 250...
2012 CHANDLER 130 BBL STEEL VACUUM TRAILER (A55745)
2012 CHANDLER 130...
2016 Nissan Altima 2.5 Sedan (A55853)
2016 Nissan Altima...
2021 HAMM HD+9I VO DOUBLE DRUM ROLLER (A51246)
2021 HAMM HD+9I VO...
Hose Reel (A55787)
Hose Reel (A55787)
 
Top