First tractor next a week, a used 4100...

[dukenyc]

I have to start off by saying that I kwow nothing of tractors and was very nervous buying this one used with no experience. It is a 1999 JD4100 HST with 500hrs. It has the 54"MMM and 47" snowthrower.

Is there anything I should do as soon as I get it? Is there anything I should not do? Anything to look out for with this model? Any mods that should be done to increase reliability?

Should I have it brought to the shop for a once over before the start of the season? The previous owner did the maintenance himself, and kept a service log. He says it is up to date and ready to roll.

 

[ronjhall]

Congrats on purchasing a tractor. /forums/images/graemlins/smile.gif
If previous owner has a maintenance log and you feel confident that it is true. Then continue with the <font color="green"> JD </font> recommended maintenance.
Did you get the owners manual? It will have lots of valuable information on how to use and maintain tractor, snowblower and mower. There should be a manual for each attachment.
I'm not sure if the manuals are still available on <font color="green"> JD's </font> site. When I tried to access their manual it had a message that site was not working.
Have you checked out
<font color="green"> JD's </font> site yet?
Of course we will want pictures. /forums/images/graemlins/grin.gif

 

[2nstonge]

If it were me, I'd bring it in for the 'once over', oil change, etc. It's short money. Not only will it put your mind at ease but will make you a paying customer at the dealership - never a bad thing when you stop by & have questions, need advice, etc. I'm relatively new to my area so I've stopped by my dealer and brought donuts! No work being done but then I can hang out for a bit and hear all the latest local dirt, er news, and get some tidbits about the tractor world too.

-Norm

 

[creeper]

I would take it in just to put your mind at ease.Just have em look it over but dont write em a blank check to start picking it apart.

 

[hhw]

Congrats on the 4100!!! That's a nice model. I'm sure you will get a lot of service out of it. Most definetly make regular visits to the Deere site for up to date info.

A look over by a local dealer is not a bad idea, if you feel comfortable with them after an initial visit. However, if you are going to do your own service now might be a good time to check the availabilty of shop manuals and get started servicing your machine.

Regarless of what you decide, you will have your tractor and a ton of fun.