Tom_H
Veteran Member
Mr. Hughes is correct. There are heavy duty (HD) and light duty (LD) flails. LD have Y shaped knives that leave a finished cut. HD have T shaped hammers which simply break off the stems of rough material.
Flail Mower Flail Mower ?s
- Thread starter ALBALD1
- Start date
- Views: 6678
PBinWA
Platinum Member
- Joined
- Jun 10, 2004
- Messages
- 906
- Location
- WA
- Tractor
- Kioti NX55, Mahindra 2615, Case 36CXB, Case W4, Volvo MC85C
I just bought an older used Befco Flail Mower and must say that it is nice to not have the length of the rough cut mower behind me (I can actually turn around without having to do a multi-point turn).
My cut quality is poor at the moment as the blades are old but I'm going to order some replacement "fine cut" blades and see how they work.
If you can afford one then they are much better for pasture and field mowing. I'm not sure how well they would work with thicker stuff but they may just shred it all up too.
PB
My cut quality is poor at the moment as the blades are old but I'm going to order some replacement "fine cut" blades and see how they work.
If you can afford one then they are much better for pasture and field mowing. I'm not sure how well they would work with thicker stuff but they may just shred it all up too.
PB
PBinWA
Platinum Member
- Joined
- Jun 10, 2004
- Messages
- 906
- Location
- WA
- Tractor
- Kioti NX55, Mahindra 2615, Case 36CXB, Case W4, Volvo MC85C
I just bought an older used Befco Flail Mower and must say that it is nice to not have the length of the rough cut mower behind me (I can actually turn around without having to do a multi-point turn).
My cut quality is poor at the moment as the blades are old but I'm going to order some replacement "fine cut" blades and see how they work.
If you can afford one then they are much better for pasture and field mowing. I'm not sure how well they would work with thicker stuff but they may just shred it all up too.
PB
My cut quality is poor at the moment as the blades are old but I'm going to order some replacement "fine cut" blades and see how they work.
If you can afford one then they are much better for pasture and field mowing. I'm not sure how well they would work with thicker stuff but they may just shred it all up too.
PB
