Ford 1500,1700/Shibaura SD2200

[Hooked_on_HP]

On my 1900 i replaced the factory electric gauge with a Sunpro mechanicalgauge. The sending unit screwed in to the head with out any adapters.
Bill

 

[jtaubrey]

Thank You for all of the great responses. There is what appears to be a sending unit mounted already with a male spade on the the top. I am not sure if it was for a oil pressure gauge or for the temperature gauge that currently isn't hooked up. I don't have a picture of it at the moment but it is just above the alternator on the block...I am making the assumption this was for the temp gauge.

 

[JC-jetro]

Thank You for all of the great responses. There is what appears to be a sending unit mounted already with a male spade on the the top. I am not sure if it was for a oil pressure gauge or for the temperature gauge that currently isn't hooked up. I don't have a picture of it at the moment but it is just above the alternator on the block...I am making the assumption this was for the temp gauge.

FYI,

Temp sending unit.

Oil pressure sending unit on the left of dip stick.

 

[jtaubrey]

Awesome... definitely the Temp sending unit for sure.

FYI,

Temp sending unit.

Oil pressure sending unit on the left of dip stick.

 

[jtaubrey]

Thanks for all the responses, the old gauge was broke as well as the sending unit. I put a universal one on from TS and all is well.