dr2ths
New member
My 2110 will at times be difficult to steer other times normal except for excessive freeplay
K5lwq
Elite Member
- Joined
- Aug 6, 2017
- Messages
- 4,900
- Location
- Mineola, TX
- Tractor
- Kioti LK2554, Branson 4815C, Satoh Beaver, Speedex
Does your unit have two sector output shafts? Pictures would help.
There should be an adjustment screw to set the backlash on the gears. If it has two shafts there is two adjustment screws. To adjust, loosen the jam nut at the base of screw. Turn screw clockwise to tighten the gear mesh. I like just a little movement of steering wheel with no movement of pitman arm.
After backlash is properly set, hold screw with screwdriver and tighten the jam nut. That should reduce the slack in steering and could help with the hard steering issues.
Good luck and let us know what you find.
There should be an adjustment screw to set the backlash on the gears. If it has two shafts there is two adjustment screws. To adjust, loosen the jam nut at the base of screw. Turn screw clockwise to tighten the gear mesh. I like just a little movement of steering wheel with no movement of pitman arm.
After backlash is properly set, hold screw with screwdriver and tighten the jam nut. That should reduce the slack in steering and could help with the hard steering issues.
Good luck and let us know what you find.
