thadgray
New member
We have a 1973 Ford 3000 diesel and the 3 point hitch will not lift all the up, do anybody know what might be causing this.
Thanks
Thanks
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Sounds like it could be as simple as a linkage adjustment, or a cam follower pin/cam surface needing attention.
I suggest you get the factor service manual before you snatch the lift cover off that beast.
soundguy
I suggest you get the factor service manual before you snatch the lift cover off that beast.
soundguy
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Uh.. CNH?.. you know 'factory'.. etc. They are stuck with the legacy ford parts support. IE.. I'd go to achevy dealer to get a factory service manual on a chevy truck.. so why not go to a CNH dealer to get a factory service manual on a ford??
soundguy
soundguy