Forks for a CT 235

   / Forks for a CT 235 #1  

lilranch2001

Super Member
Joined
Nov 25, 2009
Messages
9,015
Tractor
Bobcat CT 235
I was under the impression that I could get forks for my new tractor, but Bobcat does not list them for this tractor, does anyone know more than this?:tractor:
 
   / Forks for a CT 235 #2  
I was under the impression that I could get forks for my new tractor, but Bobcat does not list them for this tractor, does anyone know more than this?:tractor:

Search the forum for forks there are many many alternatives

eBay also has many listed

I made my own for about $40

Joel
 
   / Forks for a CT 235 #3  
I'm getting a used set from my Bobcat dealer in a couple of weeks for my CT230. They are a rental set that they are gonna trade-off.

I do have the Bob-tach though. Do you have Bob-tach?
 
   / Forks for a CT 235
  • Thread Starter
#4  
yup, I do, do you know the part number?
 
   / Forks for a CT 235 #5  
You can get clamp on the bucket edge forks,but only useful for light duty.It will lower lift capacity because they are too far ahead.I,v used a set I made for my 235 but only lift about 4-500 pounds.You,ll have to have loaded tires for sure and I only use it at the garage.Wouln,t ever consider going more than about 30 feet with anything on my forks.If you have b-tach you sould be able to find a used set,they don,t get used much by the average guy.Handy when you need em though.
 
   / Forks for a CT 235 #6  
No part number but would just be a skidsteer attachment. Try looking that way.
 
   / Forks for a CT 235
  • Thread Starter
#7  
thanks, I will
 
   / Forks for a CT 235 #8  
since you are bobtach you can get the forks from anywhere i believe and may be cheaper. they are all skid steer quick attach. many have had luck with everythingattachments.com.
 
   / Forks for a CT 235
  • Thread Starter
#9  
Thanks, I found that site earlier today, I am going to give them some serious consideration since they have free shipping, and seems like they have a good line up of products :D
 
   / Forks for a CT 235 #10  
I have a set that chain on the bucket with a chain ratchet or load binder. They work well and will handle anything that the tractor can. I use them at least once a month. The only downside is visibility. Hard to see what you are doing sometimes. The upside is they were only about $125.
 

Tractor & Equipment Auctions

TOOTHED BUCKET ATTACHMENT FOR MINI EXCAVATOR (A58214)
TOOTHED BUCKET...
2025 Swict 78in Bucket Skid Steer Attachment (A56857)
2025 Swict 78in...
42FT X 36FT METAL GARAGE BUILDING (A58214)
42FT X 36FT METAL...
(2) CARLISLE AT25X12-19 TIRES & RIMS (A58374)
(2) CARLISLE...
2014 International Maxxforce DT (A53317)
2014 International...
Unused Kivel 48" Pallet Fork Attachment (A55272)
Unused Kivel 48"...
 
Top