tcb
Member
for all you fabricators in michigan, there is a set of forks on ebay priced right for the time being. a little fab work and you would be good to go. i would like em, but to far for me to pick up.
tim
tim
forks on ebay
- Thread starter tcb
- Start date
- Views: 1252
Inspector507
Super Member
OK, How about you quit teasing those guys up North and give them a link to the forks. An eBay item number might be nice /forums/images/graemlins/grin.gif
Gatorboy
Elite Member
- Joined
- Aug 5, 2001
- Messages
- 3,138
- Location
- Bel Air, MD
- Tractor
- Kubota M8950, Bobcat 873 SSL & Kubota ZD-331
I wonder if it's this auction?
khd
Gold Member
DocHeb
Veteran Member
Could be this Set of Forks.
ssrdotto
New member
</font><font color="blue" class="small">( I wonder if it's this auction? )</font>
That was pretty amusing I needed that thanks /forums/images/graemlins/grin.gif
That was pretty amusing I needed that thanks /forums/images/graemlins/grin.gif
Gatorboy
Elite Member
- Joined
- Aug 5, 2001
- Messages
- 3,138
- Location
- Bel Air, MD
- Tractor
- Kubota M8950, Bobcat 873 SSL & Kubota ZD-331
No, it couldn't be - those are in Alabama, not Michigan.
Inspector507
Super Member
Whew, I'm glad it's not the set my wifes uncle has been holding for me for the last 2 years. I've been meaning to get up there and bring them home, but.......
I need to get them before the end of Sept., they're gonna sell the summer place and probably leave them behind if I don't go get them.
I need to get them before the end of Sept., they're gonna sell the summer place and probably leave them behind if I don't go get them.
uhmgawa
Gold Member
</font><font color="blueclass=small">( for all you fabricators in michigan, there is a set of forks on ebay priced right for the time being.)</font>
Yea, I saw them a little while ago. Personally I
haven't had the greatest experience chasing stuff
on ebay.
I ended up buying a set of new 4" x 1.25" x 48" forks
rated at 3500LB from www.budgetforklift.com. Cost
me $280 + shipping and arrived in three days.
They also have smaller/lighter forks if that might be of
interest. The best part of the whole deal was being able
to avoid Northern Tool who were way overpriced as
well.
Yea, I saw them a little while ago. Personally I
haven't had the greatest experience chasing stuff
on ebay.
I ended up buying a set of new 4" x 1.25" x 48" forks
rated at 3500LB from www.budgetforklift.com. Cost
me $280 + shipping and arrived in three days.
They also have smaller/lighter forks if that might be of
interest. The best part of the whole deal was being able
to avoid Northern Tool who were way overpriced as
well.
