eBay/Craigslist Forks price check
- Thread starter ericher69
- Start date
- Views: 2305
KYDan
Platinum Member
That appears to be a good price. Are they Kubota forks, or an aftermarket brand? Do you know the weight and capacity of each of them?
OP
ericher69
Veteran Member
Do not know any more info
I will try and email seller
Thanks
I will try and email seller
Thanks
Tompet
Platinum Member
- Joined
- Oct 6, 2004
- Messages
- 767
- Location
- Ohio
- Tractor
- Ferguson TO 20, Kubota B3300, BH77, Massey Ferguson 1540
I had a B2920 (especially if these are clamp on forks and at that price I assume they are) get the shorter 42".
With another tractor I had clamp on forks and didn't like them. When I bought the 2920 I got the Kubota quick attach with a set of aftermarket forks. The difference between clamp on and a set of frame forks, IMO, is not even close. But you do pay for the difference, I think in the long run they are worth it and they put less stress on your loader frame and bucket compared to clamp on style.
With another tractor I had clamp on forks and didn't like them. When I bought the 2920 I got the Kubota quick attach with a set of aftermarket forks. The difference between clamp on and a set of frame forks, IMO, is not even close. But you do pay for the difference, I think in the long run they are worth it and they put less stress on your loader frame and bucket compared to clamp on style.
OP
ericher69
Veteran Member
They came of a crown forklift
4000lb capacity
4000lb capacity
rsewill
Veteran Member
I've always marveled at how forks don't bend at the corner, even over time, given the leverage...
JJZ 109
Veteran Member
- Joined
- Feb 7, 2009
- Messages
- 2,175
- Location
- Lake Ontario/St. Lawrence River
- Tractor
- Kubota BX2380/LA344 loader/60" MMM, Bobcat S185 skid steer, JD X394 4 wheel steer mower
How do you propose to attach them to your B2920?
I agree with Tompet. Clamp ons are not the way to go. There are many threads and many reasons (some posted by me) for this sentiment. The only reason that I ever ordered a set of Payne's to begin with was because they would be delivered quickly and I absolutely had to have something to unload a bundled up building that was being delivered to the house. Never again will I deal with those things. Especially since I now have SSQA and Bradco forks.
OP
ericher69
Veteran Member
What do you mean by clamp on's?
I thought the all attached to some type of quick adapter?
I thought the all attached to some type of quick adapter?
Turbys_1700
Elite Member
I purchased a really nice set of clamp on forks from these folks...
I cut two pieces of 1/2" steel to use as a bucket support when screwing down the locks...
I have had very good success with these and would highly recommend them for those folk looking for a lower cost alternative or those that have a pin on bucket...
Clamp on Loader Bucket Skid Tractor Pallet Fork chain | eBay
I cut two pieces of 1/2" steel to use as a bucket support when screwing down the locks...
I have had very good success with these and would highly recommend them for those folk looking for a lower cost alternative or those that have a pin on bucket...
Clamp on Loader Bucket Skid Tractor Pallet Fork chain | eBay
