Tractor News Found Site 3 days ago... New BX2360 Tomorrow!

[magicheater]

She is HERE!!!


Real nice!! guess you don't need a mower in the desert!

50 hour service items in a box and a full tank of gas. WOW!

Hope you meant diesel!!:confused2:

OK, no time to talk, must read manual :licking:

CONGRATS!:thumbsup:

 

[johnk]

Dang it! Full tank of D.I.E.S.E.L.

These babies just sip diesel. You'll be suprised how much work you can do with so little fuel. Good luck with your purchase..

 

[sixgun]

Four years ago I was where you are today, and I still get weak in the knees sometimes when I stroll into the barn. Treat her right and she'll always be there for you.

I visited AZ a few years back and liked it just fine. With apologies to my New England brethren, I may just have to explore a longer term stay for me and the wife when it's time to retire.

 

[Overdrive]

Nice score. I'm sure you'll have that box scraper hooked up soon and will be gettin'er dirty by tomorrow. Have fun and stay safe.

ROFL! Just finished hooking up the box scraper :laughing: and tucked her in the workshop for the night.

Need to run in the morning and get a couple of retaining pins though for the bottom two hitch pins. Also need to figure out where to get the top pin for the 3 point hitch. The one I was using on the little trailer rig hooked to a quad just used a 5/8 hitch pin from one of my trailer hitches and it is a little too small. I am assuming I need a "good" fitting pin so that top bar doesn't slide around.

Funny you should mention tomorrow as well. Ran into my neighbor down the street this afternoon who has a B7800 (pretty sure that's the model) and told him about the new BX. He said congratulations and shook my hand :thumbsup: I asked him if he could give me some pointers on FEL use and we are going to meet up tomorrow morning and see what she has got. Will try to get some action pics.

Thanks for all the encouragement.

Oops, forgot to mention I didn't get the MMM since they are almost another 2k and I already have a fairly new 2 year old Craftsman riding mower. I have three buildings on the homestead with the remaining part of the acre all grass but the little guy does just fine mowing it for now. When that one goes, who knows

 

[Overdrive]

Sweet Christmas present to yourself. Don't forget about us here waiting for some action pics.

Welcome and enjoy!

LOL, thanks! However, was a Christmas present from the wife really... With me longing for a tractor for 10 years and seeing me move all that dirt by hand she is the one who said "hey, stop wishing and go get the darn thing! Just let me drive it too!"

 

[KubotainNH]

LOL, thanks! However, was a Christmas present from the wife really... With me longing for a tractor for 10 years and seeing me move all that dirt by hand she is the one who said "hey, stop wishing and go get the darn thing! Just let me drive it too!"

LOL, good enough. But is she paying for it? Hmm, I suppose the gifts I get really come out of my paycheck. Oh well, it's the thought that counts, right?

 

[buckeyefarmer]

Welcome to TBN, congrats on the nice tractor purchase. Course you could have had the TBN crowd help you spend your money :laughing:

 

[Samandothers]

Have fun tomorrow. You need to get it dirty! The grease it and get some grease on you.

 

[Overdrive]

A quick question. When I start "working" with the tractor and post up pics should I move to the operating forum and make a new post there?

Wow, the 3 point hitch is pretty complicated. Reading about all the adjustments and setup.

Checked all the fluids and such all are good.

I have a 3 acre empty lot one house over with a bunch of dirt piles to "practice" with.... I think it will be a fun day tomorrow.

I don't think I have been this excited about heavy machinery (well, BX heavy) since I drove tanks around in the Army

 

[magicheater]

Wow, the 3 point hitch is pretty complicated. Reading about all the adjustments and setup.

/QUOTE]
basically up and down , then make sure your side to side "slop" is to a minimum. I would keep it all on this same thread but others may have another opinion.

 

[troutsqueezer]

I have one of those Agri Fab box scrapers too. I used it on my road for 7 or 8 years, pulling it with my ATV and it was the best $1500 I ever spent. It's small, but heavy duty, for an ATV. I still use it with just the blade after I've scraped the road and made the ditches with my tractor to get the road really smooth.

Congrats on the new tractor.

 

[CHDinCT]

Wow, the 3 point hitch is pretty complicated. Reading about all the adjustments and setup.

There are few recent (last 2-3 months) threads on the BX and B quarter inching valve, how it works and how in most cases the stops need to be adjusted. Sounds like you've run across those threads, but if not, do read them since the functionality of the quarter inching valve is probably the least understood feature on a BX by owners and dealers alike. Most dealers I talked to didn't even know what I was referring to when I asked about the quarter inching valve. It may not be as nice as position control, but it's better than nothing for incremental adjustment of the 3PH.

 

[fdmars]

"she is the one who said "hey, stop wishing and go get the darn thing! Just let me drive it too!"

DANGER DANGER....you will end up back with the shovel. Great looking tractor, I well remember how excited I was when mine arrived and all the wonderful seat time I am having. Good luck and enjoy!!!

 

[DeltaT]

Congratulations! :thumbsup: You are going to love it. It's amazing what these machines can do.
Can't wait to see some action pictures.

 

[Overdrive]

Saturday was a fun first day with the tractor. Put 3.3 hours on it and had a blast. My neighbor gave me some pointers and showed me how to use the front loader.

Here is the playground I took the BX to first thing. Practiced loading dirt and using the box blade.

After about an hour of running around I decided to get some actual work done.

Here is a pic of behind my workshop before I moved in three years ago. Now, remember, all the dirt piles you see are gone now after three years with a shovel and ATV cart.

Flash forward to the area behind the shop I cleaned up on Saturday (Before cleanup).

And finally, after the day was done.

I love the BX2360, I think it was the perfect choice for me. Is my fuel meter broken? It's still reads full after three hours of work... AMAZING.

I still need some practice on using the FEL. Can't quite get into the groove of scooping and lifting.

I also need some advice on what RPM's to be running at. The owner's manual doesn't specifically call out RPMs other than to not run full throttle for the first 50 hours. I kept moving the throttle around to not keeep it at a fixed RPM while under 50 hours.

 

[dodge man]

Mowing is the only thing that really uses a lot of fuel. If all your doing is end loader work, they don't use much fuel at all.

 

[IH3444]

Ramble on brother..and keep those pics comming lucky!

 

[TripleR]

Unless I am running something on one of the PTO's, I run it at whatever speed I get good FEL response which varies with what you are doing. I would occasionally run the RPM's up from time to time as you go as per manual. You don't need constant RPM variations, just don't run it at the same one for long periods of time.

 

[Grandad4]

I also need some advice on what RPM's to be running at. The owner's manual doesn't specifically call out RPMs other than to not run full throttle for the first 50 hours. I kept moving the throttle around to not keeep it at a fixed RPM while under 50 hours.

The BX's are designed to run with the throttle wide open to give maximum flow and pressure to the hydraulics that run everything. But it doesn't really need "full throttle" for most work, and you eventually get a sense of how fast to run the engine. A few of the things I do, mostly based on "common sense":
1) Let the engine warm up at a moderate rpm... not idle and not wide open... for several minutes before getting to work.
2) Don't lug the engine at low rpm. Better to have it revved more than enough than too slow.
3) Use low range for any heavy work such as FEL digging, pulling that box blade, etc. Also for any steep hills.
4) Remember that the "go" pedal controls the HST and it does not operate like a gas pedal... when you need more pulling power and less speed, you back off the pedal instead of stepping on it more. This is kind of hard for some folks to get used to.
5) As noted by others, take it easy for the break in period. Avoid running wide open and change the rpm's around some.
6) Change the fluids and filters per the specs. Diesels like clean fuel and air, and all those hydraulics will last longer if the hydro fluid is likewise clean.

Good luck. You have a great little tractor that can do amazing things.