Front bucket hooks gc series
- Thread starter Bevis
- Start date
- Views: 23394
What I was saying with my reply was that all the replies to this thread are about using bolt on hooks (like you have), but the original poster was asking about use of the two factors holes in bucket. The two holes are spaced about 24" apart, so you couldn't use a regular bolt on hook for two reasons. One, you need 2 holes spaced together and 2 the location of the factory holes is not in the location on the upper lip of the bucket where you could normally see bolt on or welded on hooks.
WranglerX
Super Member
This is what I did..... It is simply a bit of 2x2x1/4 in angle iron and a little fabrication time....
Dale
Dale