6sunset6
Veteran Member
- Joined
- May 6, 2007
- Messages
- 1,055
- Location
- SE NY
- Tractor
- NH TC34DA 34HP HST, 2 rear remotes, front diverter, loaded R4's
Earlier this year I installed a front diverter valve on my FEL curl lines. I had it hooked up to a thumb on the bucket and it was ok. This weekend was prep for snow time. Loaded up the firewood shed by the house , took the bucket off,QA, put the plow on. Hooked up the diverter QD to the plow.
LOL a really nice benifit popped out. With the bucket I used the push button on the joy stick handle for the thumb. It also had a toggle switch and I could not see why I would need that. Well With the plow on set the curl. Flip the toggle and the curl stays where it is. Then the joy stick side to side angles the plow . I used to lose the position of the plow if I jogged the joy stick. NICE.
LOL a really nice benifit popped out. With the bucket I used the push button on the joy stick handle for the thumb. It also had a toggle switch and I could not see why I would need that. Well With the plow on set the curl. Flip the toggle and the curl stays where it is. Then the joy stick side to side angles the plow . I used to lose the position of the plow if I jogged the joy stick. NICE.
