Front End Loader Problem

[Al Crandall]

Have a New Holland t4.75 with a 655 tl front end loader, handle that started getting hard to push side to side to tilt bucket, the next day lever was hard to push to raise and lower lift, checked Hydro fluid and it was good, thanks for any help.

 

[Zebrafive]

Are there cables from the joystick to loader valve? If so, I would start with the cables.

 

[Al Crandall]

Thanks, I'll check it out.

 

[Dave M7040]

If your joystick has cables and further if it has a lock on the joystick to prevent inadvertent loader movement when on the road, start by locking the joystick.

The cable ends will connect to the loader valve spools with pins. Remove the pins so the spools can be centered without cable influence.

Now adjust the outer cable at the loader valve until the holes in the cable ends line up with the holes in the valve spools. Then reinstall the pins.

When the pins connecting the joystick cable are removed, unlock the joystick and check for easy smooth joystick movement.

Re-lock the joystick if cable movement is smooth and center as noted above.
Dave M7040

 

[Al Crandall]

Thanks guys, I love this forum.