dknarnd
Gold Member
How much weight can you add to the front end of a typical CUT tractor using the suitcase weighs? Enough to equal the weight of an FEL?
Ballast Front weights
- Thread starter dknarnd
- Start date
- Views: 707
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
On my 790, one can ad 6 (42 lb) weights. This comes to a bit over 250 lbs, which is far less then the 419 loader weighs.
However, it's more a matter of weight distribution rather then just bulk weight. The point is to keep the front end down for steering control, not totally counter balancing a 600+ lb rotary cutter.
I've no idea if this is a typical weight (250#), but I expect most CUT's will use between 200 and 300 lbs of front weights.
However, it's more a matter of weight distribution rather then just bulk weight. The point is to keep the front end down for steering control, not totally counter balancing a 600+ lb rotary cutter.
I've no idea if this is a typical weight (250#), but I expect most CUT's will use between 200 and 300 lbs of front weights.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
I agree.. you are not going for 1to1 offset of weight.. just counterballance.
For instance.. 800# of suitcase weights offsets my 2000+# rear mower just fine.
Soundguy
For instance.. 800# of suitcase weights offsets my 2000+# rear mower just fine.
Soundguy
timb
Veteran Member
- Joined
- Jun 14, 2002
- Messages
- 1,058
- Location
- Southwest PA
- Tractor
- Deere 4710/reverser, JD 318 (still needs TLC), JD LT160
The large frame JD's can use up to six 70lb weights (420lb total) stock, or up to 12 (840lbs) with an extension bracket. I would think that is pretty typical of other larger CUTs, possibly the class IV New Hollands might even take more.
It would be nice to have access to a scale to see how the front weights compare to the loader in overall front-to-rear balance.
It would be nice to have access to a scale to see how the front weights compare to the loader in overall front-to-rear balance.
