Sep 25, 2022 / Front wheels on Ford 3000 #1 D ddavis317 New member Joined Sep 19, 2011 Messages 19 Tractor Ford 3000 Gas My tires on my Ford 3000 are about 1/4" away from rubbing the king pin, can I mount the wheels backwards to gain clearence, without risking wheel failure?
My tires on my Ford 3000 are about 1/4" away from rubbing the king pin, can I mount the wheels backwards to gain clearence, without risking wheel failure?
Sep 25, 2022 / Front wheels on Ford 3000 #2 Tinhack Elite Member Joined Jul 3, 2020 Messages 3,153 Location Lytle, TX Tractor Ford 3910, John Deere 420C, Kubota G32XKS, IH 2606, Bad Boy Maverick-60" It may have the wrong wheel or something is bent. The picture below is my Ford 3910. The brown area is just dirt sticking to grease.
It may have the wrong wheel or something is bent. The picture below is my Ford 3910. The brown area is just dirt sticking to grease.
Sep 25, 2022 / Front wheels on Ford 3000 Thread Starter #3 OP D ddavis317 New member Joined Sep 19, 2011 Messages 19 Tractor Ford 3000 Gas Thanks for reply and pic. My 75 3000 seems to have a straighter king pin, yours is angled. I will post pic asap.
Thanks for reply and pic. My 75 3000 seems to have a straighter king pin, yours is angled. I will post pic asap.
